Inspect small diameter stainless steel pipe welds using Dual Linear Array (DLA) probes

Ứng dụng Kiểm tra đường ống thép nhỏ, vách mỏng, vật liệu austenitic khi không...

Automatic Tram/Train Wheel Inspection System Using Ultrasonic

Test tram wheels according to AAR, ISO and EN standards Transport...

Advances in the use of ultrasound in the inspection of 9% Ni welds in LNG tanks

LNG storage tanks LNG storage tanks require supercooling...

Chime/SRUT technique in under-rack corrosion testing

Kiểm tra siêu âm phạm vi ngắn còn được gọi là CHIME/SRUT hay SRGW là...

Transverse Cracking in manual and automatic ultrasonic weld inspection

Trích yếu Không thể xem nhẹ khả năng vết nứt và các lỗ hổng khác...

Phased array ultrasonic inspection with PAF probe supports long dimensional resolution of defects which reduces failure rate

Hầu hết các thí nghiệm khi xác nhận tham số thiết lập cho kiểm tra...

About AIM – TFM Acoustic Influence Map on OmniScan X3

Chi-Hang KwanGuillaume PainchaudBenoit LepageThe article was first presented at the Symposium...

2 Comments

What is TFM/FMC and the three advantages of FMC/TFM on the OmniScan X3

The OmniScan® X3 phased array ultrasonic tester (PAUT) comes with the ability to...

3 Comments

NDT Testing for Pipeline, Process Pipe, and Piping

Advanced Phased Array inspection for single-sided access welds

Imaging-assisted ultrasound examination methods such as ultra...

Should Acoustic Beam Convergence Be Used When Inspecting Normal Welds

NDT.net forum discussion topic Aug. 2015/Ed Ginzel Trăn trở “Hội tụ hay không hội tụ?”...

Check material composition with X-ray fluorescence (X-Ray Fluorescence or XRF)

What is X-ray fluorescence (XRF)? X-ray fluorescence (XRF) spectroscopy is...

Inspect 95 mm (3.74 in.) multi-component welds using the A26 Dual Linear Array™ (DLA) probe.

Giới thiệu Trong lĩnh vực dầu khí, hóa dầu và sản xuất điện, các thành...

Inspection of friction stir welds using ultrasonic

What is Friction Welding? Before we break down into different types of solder...

Using the OmniScan ultrasonic inspection PITCH-CATCH (Tandem) device with the Phased Array probe

Tandem or "parallel" ultrasonic testing technique is applied when the angle...