250 kV micro computerized directional industrial X-ray system
For non-destructive testing inspections
Radioflex EGM2 series
Rigaku offers a powerful lineup of micro computerized industrial X-ray systems for NDT inspections. What is indispensable for heavy-duty radiographic operation in the field are excellent operational productivity and durability. The Radioflex RF-EGM2 exactly meets these needs.
- The X-ray generator employs a ceramic X-ray tube featuring high reliability proven by the past records.
- The microcomputerized controller also is highly functional such that the radiographic condition can be called out instantly and that the exposure condition is memorizable. Further, block type switch buttons are mounted on its panel to facilitate the field work.
- The EGM2 series thus features simplicity and handiness to realize substantial efficiency in radiographic operation in the field.
|Tube voltage||110 kV ~ 250 kV in steps of 2 kV|
|Tube current||STD mode 5 mA (at 140 kV or more)|
|LOW mode ~ 4 mA (at 140 kV or more)|
|Duty cycle||Intermittent continuous (1:1 Max. 6 min at 25°C)|
|X-ray tube||Ceramic X-ray tube
Focal spot size (nominal) 2.0 mm x 2.0 mm
|Inherent filter||Aluminum 2 mm + Beryllium 1 mm|
|Dimensions||Generator||320 (W) x 320 (D) x 632 (H) mm|
|Controller||360 (W) x 340 (D) x 208 (H) mm|
|Power supply||Single phase AC 190 V – 240 V 50/60Hz|
|Power consumption||STD mode: 3.7 kVA|
|LOW mode: 2.8 kVA|
|Generator insulation||SF6 insulation gas|
|Generator cooling||Anode earth, forced air cooling by radiator|