Tổng quan
Mặc dù siêu âm nhiễu xạ thời gian bay (TOFD) có thể được sử dụng cho nhiều ứng dụng khác nhau, công dụng chính của nó là kiểm tra mối hàn nhanh chóng. Kỹ thuật kiểm tra còn được gọi là kỹ thuật quét TOFD vuông góc. Kể từ khi TOFD được giới thiệu vào những năm 1970, việc sử dụng kỹ thuật kiểm tra không phá hủy đáng tin cậy và dễ dàng này đã tăng đều. Có thể thực hiện kiểm tra thủ công với TOFD, tuy nhiên, kỹ thuật này thường được thực hiện kết hợp với thiết bị lưu dữ liệu, bộ mã hóa hoặc bộ quét công nghiệp. Để đạt có được sự tuân thủ theo code ở Bắc Mỹ, TOFD thường được kết hợp với các kỹ thuật kiểm tra siêu âm mảng theo phương pháp xung-dội để kiểm tra được các vùng mũ và chân của mối hàn.
TOFD có thể được sử dụng độc lập hoặc kết hợp với các kỹ thuật siêu âm khác. Một số kỹ thuật kiểm tra TOFD phổ biến nhất là:
- TOFD sử dụng độc lập
- TOFD sử dụng với nhiều kênh
- TOFD theo kiểu xung-dội / sóng mặt
- TOFD kết hợp với PAUT
- Kỹ thuật quét TOFD song song
- TOFD một phía (Single-sided TOFD)
Lý thuyết TOFD cơ bản
TOFD thường được thực hiện bằng cách sử dụng sóng dọc làm phương pháp phát hiện chính. Cảm biến siêu âm được đặt ở mỗi bên của mối hàn. Một cảm biến gửi chùm siêu âm vào vật liệu và cảm biến còn lại nhận được tín hiệu siêu âm phản xạ và nhiễu xạ từ bất liên tục. TOFD có phạm vi bao phủ rộng với một chùm tia đơn bằng cách sử dụng nguyên lý lan truyền chùm siêu âm bên trong nêm và vật liệu được kiểm tra. Khi chùm tia tiếp xúc với bất liên tục hoặc vết nứt, năng lượng nhiễu xạ phản hồi và được truyền theo mọi hướng. Đo thời gian di chuyển (bay) của chùm tia nhiễu xạ cho phép phát hiện và định cỡ bất liên tục chính xác và rất đáng tin cậy, ngay cả khi vết nứt không vuông góc với chùm tia siêu âm. Trong khi kiểm tra TOFD, tín hiệu dạng quét A được thu thập và sử dụng để tạo hình ảnh quét B (mặt bên) của mối hàn. Phân tích được thực hiện ngay trên thiết bị hoặc sử dụng phần mềm trên máy tính, và con trỏ được sử dụng để để đo chiều dài và chiều cao của bất liên tục.
Trong khi TOFD là kỹ thuật nhanh, tương đối hiệu quả, phát hiện được các khuyết tật có hướng và hình dạng bất kỳ và khả năng đánh giá kích thước khuyết tật chính xác, TOFD lại có những mặt hạn chế cố hữu ở các vùng gần mặt trên và mặt dưới của vật liệu. Phased Array bổ xung hoàn hảo cho các hạn chế này và còn cung cấp các thông tin khác giúp cho việc đánh giá khuyết tật chính xác và đơn giản hơn rất nhiều.
Để có các thông tin kỹ thuật chi tiết hơn về kiểm tra TOFD, xin tham khảo đường link.
Ưu điểm của TOFD
- Kiểm tra mối hàn với một lần quét
- Tốc độ quét rất nhanh
- Cài đặt không phụ thuộc vào cấu hình mối hàn, chỉ phụ thuộc chiều dày vật liệu
- Đánh giá chính xác kích thước khuyết tật
- Nhạy và sử dụng được cho hầu hết các loại khuyết tật khác nhau
- Không bị ảnh hưởng nhiều bởi điều kiện bề mặt mối hàn và không yêu cầu cao về chất tiếp âm
Ưu điểm của Phased Array
- Giảm thời gian quét và kiểm tra so với chụp ảnh phóng xạ
- Kiểm tra toàn bộ các vùng của mối hàn với một lần quét, bổ xung các mặt hạn chế của TOFD
- Dễ dàng tìm, phân loại và đánh giá khuyết tật so với siêu âm thường trên OmniScan hoặc sử dụng máy tính
- Dữ liệu thu được có đầy đủ A-Scan cùng với hình ảnh C-Scan cho phép thay thế chụp ảnh phóng xạ
Sử dụng OmniScan MX2, X3 và SX khi kiểm tra TOFD
올림포스 산 OmniScan MX2 với mô-đun UT2 và OmniScan® SX là những giải pháp mạnh mẽ với chi phí hợp lý khi kiểm tra TOFD. Đại diện cho những phát triển mới nhất về phần mềm và phần cứng, OmniScan SX và mô-đun UT2 cho OmniScan MX2 được thiết kế để kiểm tra mối hàn bằng kỹ thuật TOFD nhanh chóng và dễ dàng. Nhiều cải tiến hiệu suất và tỷ lệ tín hiệu/nhiễu hàng đầu cung cấp cho bạn chất lượng dữ liệu tối ưu để kiểm tra TOFD.
- Module siêu âm mới OmniScan MX2 UT2 cung cấp giải pháp mạnh, tiết kiệm để kiểm tra TOFD. Kiểm tra siêu âm nhiễu xạ trở nên dễ dàng và nhanh chóng hơn bao giờ hết.
- Việc hỗ trợ tới 8 nhóm kiểm tra cùng với giao diện hiển thị đồng thời nhiều kênh TOFD cùng lúc giúp OmniScan trở thành một thiết bị cơ động, phù hợp cho kiểm tra TOFD độc lập hay kết hợp với PAUT.
Thiết bị 옴니스캔 X3 là phiên bản tiếp theo của OmniScan MX2, với các cải tiến phù hợp cho kiểm tra TOFD chuyên dụng bao gồm:
- Menu TOFD độc lập, thao tác nhanh hơn với 4 kênh TOFD có sẵn, giảm tối đa nhu cầu sử dụng bộ Tiền khuếch đại độc lập.
- Sử dụng điện áp cao cho cả 4 kênh TOFD.
Các công cụ tích hợp giúp kiểm tra TOFD dễ dàng
- Công cụ dạng hỏi đáp hướng dẫn qua các thiết lập cụ thể để kiểm tra TOFD.
- Công cụ hiệu chuẩn khoảng cách giữa hai đầu dò (PCS).
- Hình ảnh B-scan dễ đọc hơn.
- Hiển thị đồng thời nhiều kênh TOFD (trên OmniScan MX2).
- Xử lý chuẩn tín hiệu sóng mặt
- Tần số lặp lại xung cao hơn (PRF).
- Điện áp cao hơn (lên tới 340 V); không cần đến bộ tiền khuếch đại.
- Chức năng đồng bộ và làm thẳng sóng bề mặt đã được tối ưu hóa giúp đọc kết quả TOFD dễ dàng. Sóng mặt được tối ưu và làm phẳng cũng cho phép đánh giá độ sâu chính xác hơn.
Khi kết hợp các ưu điểm trên, bạn có thể thiết lập kiểm tra TOFD nhanh hơn và đơn giản hơn bao giờ hết, giải thích kết quả dễ dàng hơn và đánh giá kích thước khuyết tật chính xác hơn giúp tăng năng suất tổng thể.
Thiết bị và Phụ kiện sử dụng trong kiểm tra TOFD
- Thiết bị OmniScan phải được sử dụng với đầu dò, nêm, và phần cứng phù hợp để có thể kiểm tra các cấu hình mối hàn khác nhau theo yêu cầu của khách hàng. Thiết bị hỗ trợ tới 2 kênh TOFD (4 đầu dò) trong một lần quét.
- Đầu dò TOFD cùng nêm có nhiều loại hỗ trợ độ dày vật liệu khác nhau.
- Thiết bị OmniScan hỗ trợ sẵn cho một kênh TOFD. Không phải sử dụng phần cứng đặc biệt nếu chỉ kiểm tra với 1 kênh TOFD (2 đầu dò).
- Khi sử dụng 2 hoặc nhiều hơn kênh tín hiệu TOFD, OmniScan phải sử dụng một bộ chuyển đổi kết nối đến đầu dò và mượn 2 kênh từ 128 kênh của máy Phased Array.
- TOFD đòi hỏi phải có một bộ gá đầu dò thích hợp để có thể hoạt động hiệu quả.
- Với 2 kênh TOFD, có thể sử dụng bộ gá nhỏ gọn HSMT Compact hỗ trợ tới 2 kênh TOFD cùng lúc (4 đầu dò).
- Thông thường, với các mối hàn có chiều dày lớn, phải sử dụng 2 hoặc 3 kênh TOFD để có thể kiểm tra được toàn bộ chiều dày.
- Bộ tiền khuếch đại giúp tăng chất lượng tín hiệu khi kiểm tra TOFD với tôn dày hơn.
Lựa chọn đầu dò kiểm tra ToFD theo chiều dày
TOFD thường được ứng dụng để kiểm tra toàn bộ mối hàn hay kiểm tra khảo sát nhanh ăn mòn vật liệu. Trong hầu hết các trường hợp, có thể kiểm tra mối hàn chỉ sử dụng duy nhất một cặp đầu dò TOFD. Phương án đặt đầu dò TOFD cần được thực hiện để đảm bảo độ bao phủ của chùm âm cần cân nhắc một số yếu tố, bao gồm lựa chọn tần số đầu dò dựa trên chiều dày vật liệu kiểm tra. Tần số đầu dò được lựa chọn tương tự như với ứng dụng siêu âm Xung-dội thông thường. Ngoài ra, kích thước biến tử của đầu dò cũng được lựa chọn dựa trên loại vật liệu kiểm tra. Đầu dò có kích thước biến tử lớn hơn cho xung có năng lượng lớn và phù hợp với các đường truyền âm dài, tuy nhiên đầu dò có kích thước nhỏ lại cho góc mở lớn hơn để kiểm tra được phạm vi rộng hơn.
Đầu dò TOFD thường là đầu dò có độ dập xung cao, phát sóng dọc với độ phân giải tốt. Các đầu dò này sử dụng biến tử độ nhay cao, băng thông rộng với tần số từ 2.25 MHz tới 15 MHz và đường kính biến tử từ 3 mm (0.25″) tới 12 mm (0.50″). Các đầu dò này cũng được sử dụng với nêm TOFD thiết kế để tạo sóng dọc trong thép.
Chiều dày (t) mm | Số kênh TOFD | Dải chiều dày | Đầu dò | Góc phát (độ) | Tần số (MHz) | Biến tử (mm) | Nêm |
6-10 | 1 | 0~t | C563-SM | 70 | 10 | 3 | ST1 ** |
10-15 | 1 | 0~t | C563-SM | 70 | 10 | 3 | ST1 ** |
15-35 | 1 | 0~t | C544-SM | 60, 70 | 10 | 6 | ST1 |
35-50 | 1 | 0~t | C543-SM | 60, 70 | 5 | 6 | ST1 |
50-100 | 2 | 0~t/2 | C543-SM | 60, 70 | 5 | 6 | ST1 |
t/2~t | C568-SM | 45, 60 | 5 | 10 | ST2 | ||
100-200 | 3 | 0~t/3 | C543-SM | 60, 70 | 5 | 6 | ST1 |
t/3~ 2t/3 | C568-SM | 45, 60 | 5 | 10 | ST2 | ||
2t/3-t | C541-SM | 45, 60 | 5 | 13 | ST2 | ||
200-300 | 4 | 0~t/4 | C543-SM | 60,70 | 5 | 6 | ST1 |
t/4~ 2t/4 | C568-SM | 45, 60 | 5 | 10 | ST2 | ||
2t/4~ 3t/4 | C566-SM | 45, 60 | 2.25 | 10 | ST2 | ||
3t/4~ t | C540-SM | 45 | 2.25 | 13 | ST2 |
- * Đầu dò V-564 sử dụng biến tử piezo-ceramic tiêu chuẩn (không phải biến tử composite).
- ** đầu dò kích thước biến tử 0.125 in. (3 mm) cũng sẽ phù hợp với nêm ST1-XXX-Cobra. Các đầu dò thuộc bảng trên có thể sử dụng kết nối LEMO 00 (-SL) hay kết nối Microdot (-SM).
Lựa chọn nêm và góc nêm khi kiểm tra TOFD
Nêm bọc thép với X-Value ngắn IHS hay Nêm nhựa IHC thông thường
Thay thế cho các nêm chế tạo hoàn toàn bằng Rexolite, bộ nêm TOFD bọc thép không gỉ tăng độ bền, độ chịu mài mòn và mang lại giá trị X-Value ngắn, giúp đặt đầu dò sát chân mối hàn.
- Chịu mài mòn tốt và tiếp âm tốt hơn do không cần chân carbide.
- X-Value ngắn (3 mm) cho phép kiểm tra các vị trí gần bề mặt hơn. Có thêm phiên bản “short” cho giá trị X-Value ngắn nhất có thể.
- Độ bền cao.
Danh mục nêm ToFD tương thích với các đầu dò ren vặn
Danh sách nêm ToFD
Mã U8 | 부품 번호 | 설명하다 |
---|---|---|
U8710001 | ST1-45L | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 45 degree longitudinal wave, without IHC option (whitout irrigation holes and carbides), |
U8710002 | ST1-45L-IHC | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides) |
U8710013 | ST1-45L-IHC-AOD12 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710014 | ST1-45L-IHC-AOD16 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 9.84 in. (250 mm) to 16 in. (406 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710015 | ST1-45L-IHC-AOD2 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 1.75 in. (44 mm) to 2 in. (50.8 mm) outside diameter (OD) pipe for inspection of circumferential welds.? |
U8710016 | ST1-45L-IHC-AOD2.25 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2 in. (50.8 mm) to 2.25 in. (57.15 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710017 | ST1-45L-IHC-AOD2.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.2 in. (55 mm) to 2.5 in. (63.5 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710018 | ST1-45L-IHC-AOD22 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710019 | ST1-45L-IHC-AOD3 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.5 in. (63.5 mm) to 3 in. (76.2 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710020 | ST1-45L-IHC-AOD3.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.9 in. (73 mm) to 3.5 in. (88.9 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710021 | ST1-45L-IHC-AOD4 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.2 in. (82 mm) to 4 in. (101.6 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710022 | ST1-45L-IHC-AOD6 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 4.5 in. (114 mm) to 6 in. (152.4 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710023 | ST1-45L-IHC-AOD8 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 5.5 in. (140 mm) to 8 inches (203.2 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710024 | ST1-50L-IHC | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides). |
U8710025 | ST1-55L-IHC | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides). |
U8710004 | ST1-60L-IHC | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides).?? |
U8710026 | ST1-60L-IHC-AOD12 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710027 | ST1-60L-IHC-AOD16 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 12 inches (305mm) to 16 inches (406mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710028 | ST1-60L-IHC-AOD2 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 1.75 in. (44 mm) to 2 in. (50.8 mm) outside diameter (OD) pipe for inspection of circumferential wel |
U8710029 | ST1-60L-IHC-AOD2.25 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2 in. (50.8 mm) to 2.25 in. (57.15 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710030 | ST1-60L-IHC-AOD2.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.2 in. (55 mm) to 2.5 in. (63.5 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710031 | ST1-60L-IHC-AOD22 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710032 | ST1-60L-IHC-AOD3 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.5 in. (63.5 mm) to 3 in. (76.2 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710033 | ST1-60L-IHC-AOD3.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.9 in. (73 mm) to 3.5 in. (88.9 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710034 | ST1-60L-IHC-AOD4 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.2 in. (82 mm) to 4 in. (101.6 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710035 | ST1-60L-IHC-AOD6 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 4.5 in. (114 mm) to 6 in. (152.4 mm) outside diameter (OD) pipe for inspection of circumferential welds.? |
U8710036 | ST1-60L-IHC-AOD8 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 5.5 in. (140 mm) to 8 in. (203.2 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710006 | ST1-70L-IHC | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides). |
U8710037 | ST1-70L-IHC-AOD12 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710038 | ST1-70L-IHC-AOD16 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 12 inches (305mm) to 16 inches (406mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710039 | ST1-70L-IHC-AOD2 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 1.75 in. (44 mm) to 2 in. (50.8 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710040 | ST1-70L-IHC-AOD2.25 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2 in. (50.8 mm) to 2.25 in. (57.15 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710041 | ST1-70L-IHC-AOD2.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.2 in. (55 mm) to 2.5 in. (63.5 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710042 | ST1-70L-IHC-AOD22 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710043 | ST1-70L-IHC-AOD3 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.5 in.(63.5 mm) to 3 in. (76.2 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710044 | ST1-70L-IHC-AOD3.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.9 in. (73 mm) to 3.5 in. (88.9 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710045 | ST1-70L-IHC-AOD4 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.2 in. (82 mm) to 4 in. (101.6 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710046 | ST1-70L-IHC-AOD6 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 4.5 in. (114 mm) to 6 in. (152.4 mm) outside diameter (OD) pipe for inspection of circumferential welds.?? |
U8710047 | ST1-70L-IHC-AOD8 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 5.5 in. (140 mm) to 8 in. (203.2 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710083 | ST2-30L-IHC | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), |
U8710008 | ST2-45L-IHC | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 - 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (with irrigation holes and carbides) |
U8710048 | ST2-45L-IHC-AOD12 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710049 | ST2-45L-IHC-AOD16 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching12 inches (305mm) to 16 inches (406mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710050 | ST2-45L-IHC-AOD2 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 1.75 inches (44mm) to 2 inches (50.8mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710051 | ST2-45L-IHC-AOD2.25 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2 inches (50.8mm) to 2.25 inches (57.15mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710052 | ST2-45L-IHC-AOD2.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.2 inches (55mm) to 2.5 inches (63.5mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710053 | ST2-45L-IHC-AOD22 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710054 | ST2-45L-IHC-AOD3 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.5 inches (63.5mm) to 3 inches (76.2mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710055 | ST2-45L-IHC-AOD3.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.9 inches (73mm) to 3.5 inches (88.9mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710056 | ST2-45L-IHC-AOD4 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.2 inches (82mm) to 4 inches (101.6mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710057 | ST2-45L-IHC-AOD6 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 4.5 inches (114mm) to 6 inches (152.4mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710058 | ST2-45L-IHC-AOD8 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 5.5 inches (140mm) to 8 inches (203.2mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710059 | ST2-50L-IHC | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides). |
U8710010 | ST2-60L-IHC | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 - 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (whit irrigation holes and carbides). |
U8710060 | ST2-60L-IHC-AOD12 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710061 | ST2-60L-IHC-AOD16 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 12 inches (305mm) to 16 inches (406mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710062 | ST2-60L-IHC-AOD2 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 1.75 inches (44mm) to 2 inches (50.8mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710063 | ST2-60L-IHC-AOD2.25 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2 inches (50.8mm) to 2.25 inches (57.15mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710064 | ST2-60L-IHC-AOD2.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.2 inches (55mm) to 2.5 inches (63.5mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710065 | ST2-60L-IHC-AOD22 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710066 | ST2-60L-IHC-AOD3 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.5 inches (63.5mm) to 3 inches (76.2mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710067 | ST2-60L-IHC-AOD3.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.9 inches (73mm) to 3.5 inches (88.9mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710068 | ST2-60L-IHC-AOD4 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.2 inches (82mm) to 4 inches (101.6mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710069 | ST2-60L-IHC-AOD6 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 4.5 inches (114mm) to 6 inches (152.4mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710070 | ST2-60L-IHC-AOD8 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 5.5 inches (140mm) to 8 inches (203.2mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710012 | ST2-70L-IHC | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave with IHC option (irrigation holes and carbides). |
U8710071 | ST2-70L-IHC-AOD12 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710072 | ST2-70L-IHC-AOD16 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 12 inches (305mm) to 16 inches (406mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710073 | ST2-70L-IHC-AOD2 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 1.75 inches (44mm) to 2 inches (50.8mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710074 | ST2-70L-IHC-AOD2.25 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2 inches (50.8mm) to 2.25 inches (57.15mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710075 | ST2-70L-IHC-AOD2.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.2 inches (55mm) to 2.5 inches (63.5mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710076 | ST2-70L-IHC-AOD22 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710077 | ST2-70L-IHC-AOD3 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.5 inches (63.5mm) to 3 inches (76.2mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710078 | ST2-70L-IHC-AOD3.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.9 inches (73mm) to 3.5 inches (88.9mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710079 | ST2-70L-IHC-AOD4 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.2 inches (82mm) to 4 inches (101.6mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710080 | ST2-70L-IHC-AOD6 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 4.5 inches (114mm) to 6 inches (152.4mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710081 | ST2-70L-IHC-AOD8 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 5.5 inches (140mm) to 8 inches (203.2mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710086 | ST1-0L-IHC | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 0 degree longitudinal wave, with IHC option (irrigation holes and carbides). |
U8710087 | ST1-60L-IHC-AOD10 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching a 10-inch outside diameter (OD) pipe for inspection of circumferential welds. |
U8710088 | ST1-60L-IHC-AOD30 | Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching a 30-inch outside diameter (OD) pipe for inspection of circumferential welds. |
U8710003 | ST1-60L | TOFD wedge for .25 in. (0.25 in.) txdr, 60 degree , NO IHC |
U8720701 | ST2-0L-IHC | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 0 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge has a 15.9 mm delay line. |
U8720887 | ST1-60L-IHC-AID22 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 22 inches (558.8 mm) Axial Inside Diameter (AID) Pipe for inspection of Circomferential Welds. |
U8700507 | ST1-65L-IHC | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 65 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). |
U8700520 | ST1-45L-IHC-AOD5 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.8 in. (98 mm) to 5 in. (127 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700521 | ST1-50L-IHC-AOD12 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700522 | ST1-50L-IHC-AOD16 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 12 inches (305mm) to 16 inches (406mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700523 | ST1-50L-IHC-AOD2 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 1,75 inches (44mm) to 2 inches (50,8mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700524 | ST1-50L-IHC-AOD2.25 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 2 inches (50,8mm) to 2,25 inches (57,15mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700525 | ST1-50L-IHC-AOD2.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 2,2 inches (55mm) to 2,5 inches (63,5mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700526 | ST1-50L-IHC-AOD22 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700527 | ST1-50L-IHC-AOD3 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 2,5 inches (63,5mm) to 3 inches (76,2mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700528 | ST1-50L-IHC-AOD3.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 2,9 inches (73mm) to 3,5 inches (88,9mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700529 | ST1-50L-IHC-AOD4 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 3,2 inches (82mm) to 4 inches (101,6mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700530 | ST1-50L-IHC-AOD5 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 3,8 inches (98mm) to 5 inches (127 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700531 | ST1-50L-IHC-AOD6 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 4,5 inches (114mm) to 6 inches (152,4mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700532 | ST1-50L-IHC-AOD8 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 5,5inches (140mm) to 8 inches (203,2mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700533 | ST1-55L-IHC-AOD12 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700534 | ST1-55L-IHC-AOD16 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching12 inches (305mm) to 16 inches (406mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700535 | ST1-55L-IHC-AOD2 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 1,75 inches (44mm) to 2 inches (50,8mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700536 | ST1-55L-IHC-AOD2.25 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 2 inches (50.8mm) to 2,25 inches (57,15mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700537 | ST1-55L-IHC-AOD2.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 2,2 inches (55mm) to 2,5 inches (63,5mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700538 | ST1-55L-IHC-AOD22 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700539 | ST1-55L-IHC-AOD3 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 2,5 inches (63,5mm) to 3 inches (76,2mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700540 | ST1-55L-IHC-AOD3.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 2,9 inches (73mm) to 3.5 inches (88,9mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700541 | ST1-55L-IHC-AOD4 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 3,2 inches (82mm) to 4 inches (101,6mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700542 | ST1-55L-IHC-AOD5 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 3,8 inches (98mm) to 5 inches (127mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700543 | ST1-55L-IHC-AOD6 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 4,5 inches (114mm) to 6 inches (152,4mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700544 | ST1-55L-IHC-AOD8 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 5,5 inches (140mm) to 8 inches (203,2mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700545 | ST1-70L-IHC-AOD5 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.8 in. (98 mm) to 5 in. (127 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700546 | ST2-45L-IHC-AOD5 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.8 inches (98mm) to 5 inches (127mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700547 | ST2-50L-IHC-AOD12 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700548 | ST2-50L-IHC-AOD16 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 12 inches (305mm) to 16 inches (406mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700549 | ST2-50L-IHC-AOD2 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 1.75 inches (44mm) to 2 inches (50.8mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700550 | ST2-50L-IHC-AOD2.25 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 2 inches (50.8mm) to 2.25 inches (57.15mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700551 | ST2-50L-IHC-AOD2.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 2.2 inches (55mm) to 2.5 inches (63.5mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700552 | ST2-50L-IHC-AOD22 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700553 | ST2-50L-IHC-AOD3 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 2.5 inches (63.5mm) to 3 inches (76.2mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700554 | ST2-50L-IHC-AOD3.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 2.9 inches (73mm) to 3.5 inches (88.9mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700555 | ST2-50L-IHC-AOD4 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 3.2 inches (82mm) to 4 inches (101.6mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700556 | ST2-50L-IHC-AOD5 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 3.8 inches (98mm) to 5 inches (127mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700557 | ST2-50L-IHC-AOD6 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 4.5 inches (114mm) to 6 inches (152.4mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700558 | ST2-50L-IHC-AOD8 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 5.5 inches (140mm) to 8 inches (203.2mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700559 | ST2-60L-IHC-AOD5 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.8 inches (98mm) to 5 inches (127mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700560 | ST2-70L-IHC-AOD5 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.8 inches (98mm) to 5 inches (127mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700590 | ST1-60L-IHC-AOD5 | Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.8 in. (98 mm) to 5 in. (127 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710005 | ST1-70L | Plain 70° TOFD Wedge 6 mm (0.25 in.) MAB |
U8710214 | ST1C-70L-IHS-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame) |
U8710091 | ST2-30L-IHC-AOD2 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 1.75 inches (44mm) to 2 inches (50.8mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710092 | ST2-30L-IHC-AOD2.25 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2 inches (50.8mm) to 2.25 inches (57.15mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710093 | ST2-30L-IHC-AOD2.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.2 inches (55mm) to 2.5 inches (63.5mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710094 | ST2-30L-IHC-AOD3 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.5 inches (63.5mm) to 3 inches (76.2mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710095 | ST2-30L-IHC-AOD3.5 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.9 inches (73mm) to 3.5 inches (88.9mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710096 | ST2-30L-IHC-AOD4 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.2 inches (82mm) to 4 inches (101.6mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710097 | ST2-30L-IHC-AOD5 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.8 in. (98 mm) to 5 in. (127 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710098 | ST2-30L-IHC-AOD6 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 4.5 in. (114 mm) to 6 in. (152.4 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710099 | ST2-30L-IHC-AOD8 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 5.5 inches (131.75mm) to 8 inches (203.2mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710100 | ST2-30L-IHC-AOD12 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710101 | ST2-30L-IHC-AOD16 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 12 inches (305mm) to 16 inches (406mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710102 | ST2-30L-IHC-AOD22 | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710009 | ST2-60L | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 - 12.5mm element diameter, 60 degree longitudinal wave, without IHC option (whitout irrigation holes and carbides), |
U8710007 | ST2-45L | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 - 12.5mm element diameter, 45 degree longitudinal wave, without IHC option (without irrigation holes and carbides) |
U8710011 | ST2-70L | Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 - 12.5mm element diameter, 70 degree longitudinal wave, without IHC option (whitout irrigation holes and carbides), |
U8721251 | ST2-55L-IHC | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 55 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). |
U8700886 | ST1-52L-IHC | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 52 degree Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). |
U8700887 | ST1-52L-IHC-AOD8 | Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter 52 degree longitudinal wave with IHC option (irrigation holes and carbides).The wedge features a curvature matching 5.5 inches (131.75mm) to 8 inches (203.2 mm) outside diameter (OD) pipe for inspection of circumferential welds.?? |
U8700888 | ST1-52L-IHC-AOD12 | Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter 52 degree longitudinal wave with IHC option (irrigation holes and carbides).The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds.? |
U8700889 | ST1-52L-IHC-AOD7 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 52 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 7 inches (177.8 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds. |
U8700890 | ST1-45L-IHC-AOD7 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 7 inches (177.8 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds. |
U8700891 | ST1-60L-IHC-AOD7 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 7 inches (177.8 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds. |
U8700892 | ST1-70L-IHC-AOD7 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 7 inches (177.8 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds. |
U8700893 | ST1-52L-IHC-AOD10 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 52 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10 inches (254 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds. |
U8700894 | ST1-45L-IHC-AOD10 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10 inches (254 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds. |
U8700895 | ST1-70L-IHC-AOD10 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10 inches (254 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds. |
U8700905 | ST2-60L-IHC-COD18 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides in rexolite, no ring). The wedge features a curvature matching 18 inches (457.2 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
U8700906 | ST2-60L-IHC-COD20 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides in rexolite, no ring). The wedge features a curvature matching 20 inches (508 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
U8700910 | ST2-45L-IHC-COD18 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides in rexolite, no ring). The wedge features a curvature matching 18 inches (457.2 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
U8700911 | ST2-45L-IHC-COD20 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides in rexolite, no ring). The wedge features a curvature matching 20 inches (508 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
U8721569 | ST1-70L-IHC-AOD18 | Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter 70 degree longitudinal wave with IHC option (irrigation holes and carbides).The wedge features a curvature matching 18 inches (457mm) outside diameter (OD) pipe for inspection of circumferential welds.?? |
U8700985 | ST1-45L-IHC-AOD30 | Standard wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 22 in. (558 mm) to 30 in. (762 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8700986 | ST1-70L-IHC-AOD30 | Standard wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 22 in. (558 mm) to 30 in. (762 mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710117 | ST1-70L-IHC-AOD24 | Custom wedge for conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 24 (609.6mm) outside diameter (OD) pipe for inspection of circumferential welds. |
U8710122 | ST1-60L-HDPE-WHC | Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 60 degree longitudinal wave in High Density Polyethylene (HDPE), with WHC option (Water column, holes and carbides). |
U8710123 | ST2-60L-HDPE-WHC | Custom wedge for conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree degree longitudinal wave in High Density Polyethylene (HDPE), with WHC option (Water column, holes and carbides). |
U8710124 | ST2-70L-HDPE-WHC | Custom wedge for conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree degree longitudinal wave in High Density Polyethylene (HDPE), with WHC option (Water column, holes and carbides). |
U8710125 | ST1-45L-HDPE-WHC | Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 45 degree longitudinal wave in High Density Polyethylene (HDPE), with WHC option (Water column, holes and carbides). |
U8710126 | ST2-45L-HDPE-WHC | Custom wedge for conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave in High Density Polyethylene (HDPE), with WHC option (Water column, holes and carbides). |
U8701035 | ST2-65L-IHC | Standard wedge for conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 65 degree longitudinal wave, with IHC option (Irrigation, holes and carbides). |
U8721845 | ST1-70L-HDPE-WHC | Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 70 degree longitudinal wave in High Density Polyethylene (HDPE), with WHC option (Water column, holes and carbides). |
U8710127 | ST1-60L-AOD1 | Custom wedge for conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 60 degree longitudinal wave, without IHC option (Irrigation, holes and carbides). The wedge features a curvature matching 1 inches (25.4mm) outside diameter (OD) pipe for inspection of circomferencial welds. |
U8710128 | ST1-75L-IHC | Custom Wedge for Conventional TOFD uT Probe, Panametrics type, 3 or 6mm element diameter, 75 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). |
U8721863 | ST1-60L-IHC-AOD18 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 18 inches (457.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds. |
U8721864 | ST1-45L-IHC-AOD18 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 18 inches (457.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds. |
U8721904 | ST1-70L-IHC-AOD14 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds. |
U8710129 | ST1-70L-IHC-AOD20 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds. |
U8701158 | ST1-55L | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 55 degree Refracted Angle in Steel, Longitudinal Wave, without IHCwithout IHC Option (Irrigation, Holes and Carbides). |
U8701159 | ST2-55L | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 55 degree Refracted Angle in Steel, Longitudinal Wave, without IHCwithout IHC Option (Irrigation, Holes and Carbides). |
U8710130 | ST1-70L-IHC-AOD6.625 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6.625 inches (168.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8701308 | ST1-52L-IHC-AOD16 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 52 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching from 12 inches (304.8 mm) to 16 inches (406.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8701309 | ST1-52L-IHC-AOD6 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 52 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching from 5 inches (127 mm) to 6 inches (152.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8701310 | ST1-52L-IHC-AOD4 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 52 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching from 3.5 inches (88.9 mm) to 4 inches (101.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8701311 | ST1-52L-IHC-AOD3 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 52 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching from 2.5 inches (63.5 mm) to 3 inches (76.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8701348 | COBRA-A-ST1-70L | ST1 wedge kit for Cobra scanner. KIT includes: one pair of flat wedges plus 9 pairs of curved wedges to cover from 1.05in to 4.5in OD pipes. To fit ST1 probes with 3mm diameter elements. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701357 | ST1-70L-IHC-AOD36 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 36 inches (914.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710131 | ST1-60L-IHC-AOD36 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 36 inches (914.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710132 | ST1-60L-IHC-AOD24 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 24 inches (609.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710133 | ST1-60L-IHC-AOD20 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710134 | ST1-60L-IHC-AOD14 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710135 | ST1-50L-IHC-AOD36 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 36 inches (914.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710136 | ST1-50L-IHC-AOD20 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710137 | ST1-45L-IHC-AOD36 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 36 inches (914.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710138 | ST1-45L-IHC-AOD24 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 24 inches (609.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710139 | ST1-45L-IHC-AOD20 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710140 | ST1-45L-IHC-AOD14 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8701360 | ST1-70L-IH-AOD2.875-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 2.375 in. (60.33 mm) to 2.875 in. (73.03 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701361 | ST1-70L-IH-AOD3.5-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 2.875 in. (73.0 3 mm) to 3.5 in. (88.9 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701362 | ST1-70L-IH-AOD4-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 3.5 in. (88.9 mm) to 4 in. (101.6 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701363 | ST1-70L-IH-AOD4.5-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 4 in. (101.6 mm) to 4.5 in. (114.3 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701364 | ST1-70L-IH-AOD0.84-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 0.84 in. (21.34 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701365 | ST1-70L-IH-AOD1.05-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 0.84 in. (21.34 mm) to 1.05 in. (26.67 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701366 | ST1-70L-IH-AOD1.315-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.05 in. (26.67 mm) to 1.315 in. (33.4 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701367 | ST1-70L-IH-AOD1.66-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.315 in. (33.4 mm) to 1.66 in. (42.16 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701368 | ST1-70L-IH-AOD1.9-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.66 in. (42.16 mm) to 1.9 inches (48.26 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701369 | ST1-70L-IH-AOD2.375-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.9 in. (48.26 mm) to 2.375 in. (60.33 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8722259 | ST1-60L-IHC-AOD9.96 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 9.96 inches (253 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8722260 | ST1-60L-IHC-AOD9.63 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 9.63 inches (244.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8722264 | ST1-70L-IH-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). |
U8710142 | ST1-45L-IHS-AOD4.5 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 4 inches (101.6 mm) to 4.5 inches (114.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710143 | ST1-45L-IHS-AOD5.563 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 4.5 inches (114.3 mm) to 5.563 inches (141.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710144 | ST1-45L-IHS-AOD6.625 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 5.563 inches (141.3 mm) to 6.625 inches (168.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710145 | ST1-45L-IHS-AOD8.625 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 6.625 inches (168.3 mm) to 8.625 inches (219.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710146 | ST1-45L-IHS-AOD10.75 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 8.625 inches (219.1 mm) to 10.75 inches (273.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710147 | ST1-45L-IHS-AOD12.75 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 10.75 inches (273.1 mm) to 12.75 inches (323.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710148 | ST1-45L-IHS-AOD16 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 12.75 inches (323.9 mm) to 16 inches (406.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710149 | ST1-45L-IHS-AOD20 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 16 inches (406.4 mm) to 20 inches (508 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710150 | ST1-45L-IHS-AOD24 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 20 inches (508 mm) to 24 inches (610 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710152 | ST1-60L-IHS-AOD4.5 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 4 inches (101.6 mm) to 4.5 inches (114.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710153 | ST1-60L-IHS-AOD5.563 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 4.5 inches (114.3 mm) to 5.563 inches (141.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710154 | ST1-60L-IHS-AOD6.625 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 5.563 inches (141.3 mm) to 6.625 inches (168.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710155 | ST1-60L-IHS-AOD8.625 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 6.625 inches (168.3 mm) to 8.625 inches (219.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710156 | ST1-60L-IHS-AOD10.75 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 8.625 inches (219.1 mm) to 10.75 inches (273.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710157 | ST1-60L-IHS-AOD12.75 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 10.75 inches (273.1 mm) to 12.75 inches (323.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710158 | ST1-60L-IHS-AOD16 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 12.75 inches (323.9 mm) to 16 inches (406.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710159 | ST1-60L-IHS-AOD20 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 16 inches (406.4 mm) to 20 inches (508 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710160 | ST1-60L-IHS-AOD24 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 20 inches (508 mm) to 24 inches (610 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710162 | ST1-70L-IHS-AOD4.5 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 4 inches (101.6 mm) to 4.5 inches (114.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710163 | ST1-70L-IHS-AOD5.563 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 4.5 inches (114.3 mm) to 5.563 inches (141.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710164 | ST1-70L-IHS-AOD6.625 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 5.563 inches (141.3 mm) to 6.625 inches (168.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710165 | ST1-70L-IHS-AOD8.625 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 6.625 inches (168.3 mm) to 8.625 inches (219.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710166 | ST1-70L-IHS-AOD10.75 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 8.625 inches (219.1 mm) to 10.75 inches (273.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710167 | ST1-70L-IHS-AOD12.75 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 10.75 inches (273.1 mm) to 12.75 inches (323.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710168 | ST1-70L-IHS-AOD16 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 12.75 inches (323.9 mm) to 16 inches (406.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710169 | ST1-70L-IHS-AOD20 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 16 inches (406.4 mm) to 20 inches (508 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710170 | ST1-70L-IHS-AOD24 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 20 inches (508 mm) to 24 inches (610 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710141 | ST1-45L-IHS | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). |
U8710151 | ST1-60L-IHS | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). |
U8710161 | ST1-70L-IHS | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). |
U8722283 | ST1-70L-CUNI-IHC | ETO0049: Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Copper Nickel alloy, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). |
U8722284 | ST1-60L-CUNI-IHC | ETO0049: Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Copper Nickel alloy, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). |
U8710171 | ST2-15L-IHC | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 15 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). |
U8710172 | COBRA-A-ST1-80L | ST1 -80L wedge kit for Cobra scanner. KIT includes: one pair of flat wedges plus 9 pairs of curved wedges to cover from 1.05in to 4.5in OD pipes. To fit ST1 probes with 3mm diameter elements. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701413 | ST1-80L-IH-AOD1.05-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 0.84 in. (21.34 mm) to 1.05 in. (26.67 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701414 | ST1-80L-IH-AOD1.315-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.05 in. (26.67 mm) to 1.315 in. (33.4 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701415 | ST1-80L-IH-AOD1.66-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.315 in. (33.4 mm) to 1.66 in. (42.16 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701416 | ST1-80L-IH-AOD1.9-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.66 in. (42.16 mm) to 1.9 inches (48.26 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701417 | ST1-80L-IH-AOD2.375-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.9 in. (48.26 mm) to 2.375 in. (60.33 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701418 | ST1-80L-IH-AOD2.875-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 2.375 in. (60.33 mm) to 2.875 in. (73.03 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701419 | ST1-80L-IH-AOD3.5-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 2.875 in. (73.0 3 mm) to 3.5 in. (88.9 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701420 | ST1-80L-IH-AOD4-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 3.5 in. (88.9 mm) to 4 in. (101.6 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701421 | ST1-80L-IH-AOD4.5-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 4 in. (101.6 mm) to 4.5 in. (114.3 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
U8701422 | ST1-80L-IH-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). |
U8710173 | ST1-50L-IHS | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). |
U8710174 | ST1-50L-IHS-AOD4.5 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 4 inches (101.6 mm) to 4.5 inches (114.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710175 | ST1-50L-IHS-AOD5.563 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 4.5 inches (114.3 mm) to 5.563 inches (141.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710176 | ST1-50L-IHS-AOD6.625 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 5.563 inches (141.3 mm) to 6.625 inches (168.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710177 | ST1-50L-IHS-AOD8.625 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 6.625 inches (168.3 mm) to 8.625 inches (219.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710178 | ST1-50L-IHS-AOD10.75 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 8.625 inches (219.1 mm) to 10.75 inches (273.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710179 | ST1-50L-IHS-AOD12.75 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 10.75 inches (273.1 mm) to 12.75 inches (323.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710180 | ST1-50L-IHS-AOD16 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 12.75 inches (323.9 mm) to 16 inches (406.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710181 | ST1-50L-IHS-AOD20 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 16 inches (406.4 mm) to 20 inches (508 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710182 | ST1-50L-IHS-AOD24 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 20 inches (508 mm) to 24 inches (610 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8701446 | ST2-30L-IHC-COD22 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 30 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 22 inches (558.8 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
U8701454 | ST1-70L-IHS-AOD3 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2.5 inches (63.5 mm) to 3 inches (76.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8701457 | ST1-65L-IHC-AOD12 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 65 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching from 8 inches (203.2 mm) to 12 inches (304.8 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8701458 | ST1-65L-IHC-AOD8 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 65 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching from 6 inches (152.4 mm) to 8 inches (203.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8701459 | ST1-65L-IHC-AOD6 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 65 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching from 5 inches (127 mm) to 6 inches (152.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710183 | ST1-70L-IHC-AOD26 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 26 inches (660.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710184 | ST1-60L-IHC-AOD26 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 26 inches (660.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8701505 | ST1-70L-IHC-AOD12.75 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 12.75 inches (323.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8701506 | ST1-70L-IHC-AOD10.75 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 10.75 inches (273.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8701507 | ST1-70L-IHC-AOD8.625 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 8.625 inches (219.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8701508 | ST1-70L-IHC-AOD4.5 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 4.5 inches (114.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8701509 | ST1-60L-IHC-AOD12.75 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 12.75 inches (323.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8701510 | ST1-60L-IHC-AOD10.75 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 10.75 inches (273.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8701511 | ST1-60L-IHC-AOD8.625 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 8.625 inches (219.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8701512 | ST1-60L-IHC-AOD6.625 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 6.625 inches (168.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8722526 | ST1-30L-IHC | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 30 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).? |
U8722527 | ST1-70L-IHC-AOD28 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 28 inches (711.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8722528 | ST1-60L-IHC-AOD28 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 28 inches (711.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710186 | ST1-60L-COD6 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 6 inches (152.4 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
U8710187 | ST1-60L-COD8 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 8 inches (203.2 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
U8710188 | ST1-60L-COD10 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 10 inches (254 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
U8710189 | ST1-60L-COD12 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 12 inches (304.8 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
U8710190 | ST1-60L-COD14 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 14 inches (355.6 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
U8710191 | ST1-60L-COD16 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 16 inches (406.4 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
U8710192 | ST1-60L-COD20 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 20 inches (508 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
U8710195 | ST1-60L-IHC-AOD4.5 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 4.5 inches (114.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710197 | ST1-70L-IHS-COD113MM | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 113 mm (4.449 inches) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_ |
U8710198 | ST1-70L-IHS-COD132MM | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 132 mm (5.197 inches) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_ |
U8710199 | ST1-60L-IHC-AID19.25 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 19.25 inches (489 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. |
U8710200 | ST1-60L-IHS-COD132MM | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 132 mm (5.197 inches) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
U8710201 | ST1-60L-IHS-COD113MM | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 113 mm (4.449 inches) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_ |
U8710204 | ST1-45L-IHC-AOD12.75 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12.75 inches (323.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8710205 | ST1-45L-IHC-AOD10.75 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10.75 inches (273.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8710206 | ST1-45L-IHC-AOD8.625 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 8.625 inches (219.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8722789 | ST1-55L-IHC-AOD10 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 9.96 inches (253 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8710213 | ST1C-60L-IHS-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). _x000D_ |
U8710216 | ST1-70L-AID3 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, without IHC Option Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 3 inches (76.2 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_ |
U8710217 | ST1-60L-AID3 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 3 inches (76.2 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_ |
U8710218 | ST1-45L-AID3 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 3 inches (76.2 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701651 | ST1-55L-IHC-AOD8.625 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 55° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 8.625 inches (219.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
U8701657 | ST1-80L-IHC | Standard Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 80° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). _x000D_ |
U8701660 | ST1C-60L-IHS-AOD6.625-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 6.625in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701661 | ST1C-60L-IHS-AOD8.625-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 8.625in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701662 | ST1C-60L-IHS-AOD10.75-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 10.75in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701663 | ST1C-60L-IHS-AOD12.75-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 12.75in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701664 | ST1C-60L-IHS-AOD14-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 14in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701665 | ST1C-60L-IHS-AOD16-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 16in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701666 | ST1C-60L-IHS-AOD18-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 18in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701667 | ST1C-60L-IHS-AOD20-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 20in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701668 | ST1C-70L-IHS-AOD6.625-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 6.625in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701669 | ST1C-70L-IHS-AOD8.625-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 8.625in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701670 | ST1C-70L-IHS-AOD10.75-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 10.75in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701671 | ST1C-70L-IHS-AOD12.75-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 12.75in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701672 | ST1C-70L-IHS-AOD14-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 14in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701673 | ST1C-70L-IHS-AOD16-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 16in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701674 | ST1C-70L-IHS-AOD18-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 18in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701675 | ST1C-70L-IHS-AOD20-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 20in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701676 | ST1C-45L-IHS-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). _x000D_ |
U8701677 | ST1C-45L-IHS-AOD6.625-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 6.625in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701678 | ST1C-45L-IHS-AOD8.625-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 8.625in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701679 | ST1C-45L-IHS-AOD10.75-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 10.75in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701680 | ST1C-45L-IHS-AOD12.75-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 12.75in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701681 | ST1C-45L-IHS-AOD14-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 14in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701682 | ST1C-45L-IHS-AOD16-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 16in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701683 | ST1C-45L-IHS-AOD18-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 18in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
U8701684 | ST1C-45L-IHS-AOD20-Short | Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 20in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
Q7000001 | ST1-60L-IH-AOD1.66-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.315 in. (33.4 mm) to 1.66 in. (42.16 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. _x000D_ |
Q7000002 | ST1-60L-IH-AOD1.9-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.66 in. (42.16 mm) to 1.9 inches (48.26 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. _x000D_ |
Q7000003 | ST1-60L-IH-AOD2.375-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.9 in. (48.26 mm) to 2.375 inches (60.33 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. _x000D_ |
Q7000004 | ST1-60L-IH-AOD2.875-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 2.375 in. (60.33 mm) to 2.875 inches (73.03 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. _x000D_ |
Q7200084 | ST1-65L-IHS | Standard Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 65 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). _x000D_ |
Q7100001 | ST1-60L-IHS-AOD14 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 14 inches (355.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
Q7200146 | ST1-20L-IHC | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 20° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). |
Q7200147 | ST1-25L-IHC | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 20° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). |
Q7200148 | ST2-20L-IHC | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 20° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). |
Q7200149 | ST2-25L-IHC | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 25° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). |
Q7200265 | ST1-70L-IHC-COD16 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 16 inches (406.4 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7200267 | ST1-65L-IHS-COD8 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides in rexolite, no ring). The wedge features a curvature matching 18 inches (457.2 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7200281 | ST1-60L-IHC-COD8 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 8 inches (203.2 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7000079 | ST1-60L-IHC-COD8.625 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 8.625 inches (219.1 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_ |
Q7000080 | ST1-70L-IHC-COD8.625 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 8.625 inches (219.1 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_ |
Q7000081 | ST1-70L-COD12.75 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12.75 inches (323.9 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7000084 | ST1-80L-IHC-COD12 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 80° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12 inches (304.8 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_ |
Q7000085 | ST1-75L-IHC-AOD8 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 75° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching from 6 inches (152.4 mm) to 8 inches (203.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7000086 | ST1-70L-IHC-COD12 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12 inches (304.8 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7200403 | ST1-65L | Standard Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 65° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). |
Q7200431 | ST1-60L-IHS-AOD2.5 | Custom wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 2.5 inches (63.5 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7200432 | ST1-60L-IHS-AOD3.5 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2.875 inches (73 mm) to 3.5 inches (88.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7200433 | ST1-60L-IHS-AOD30 | Custom wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 30 inches (772 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7200434 | ST1-70L-IHS-AOD2.5 | Custom wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 2.5 inches (63.5 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7200435 | ST1-70L-IHS-AOD3.5 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2.875 inches (73 mm) to 3.5 inches (88.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7200436 | ST1-70L-IHS-AOD30 | Custom wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 30 inches (772 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7100003 | ST1-70L-CUNI-IH-AOD3.5-COBRA | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in CuNi, Longitudinal Wave, with IH Option (Irrigation and Holes). The wedge features a curvature matching 3.5in Axial Outside Diamater for Inspection of Circumferential Welds. Suitable for the Cobra scanner with reduced clearance due to TOFD probes. _x000D_ |
Q7100004 | ST1-45L-IHC-AID12 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12 inches (304.8 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. |
Q7100005 | ST1-60L-IHC-AID12 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12 inches (304.8 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. |
Q7100006 | ST1-70L-IHC-AID12 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12 inches (304.8 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. |
Q7100007 | ST1-45L-IHC-AID20 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. |
Q7100008 | ST1-60L-IHC-AID20 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. |
Q7100009 | ST1-70L-IHC-AID20 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. |
Q7200491 | ST1-45L-IHS-AOD2.375 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2 inches (50.8 mm) to 2.375 inches (60.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7200492 | ST1-45L-IHS-AOD2.875 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2.375 inches (60.3 mm) to 2.875 inches (73 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7200493 | ST1-45L-IHS-AOD3.5 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2.875 inches (73 mm) to 3.5 inches (88.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7200494 | ST1-60L-IHS-AOD2.375 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2 inches (50.8 mm) to 2.375 inches (60.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7200495 | ST1-60L-IHS-AOD2.875 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2.375 inches (60.3 mm) to 2.875 inches (73 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7200496 | ST1-70L-IHS-AOD2.375 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2 inches (50.8 mm) to 2.375 inches (60.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7200497 | ST1-70L-IHS-AOD2.875 | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2.375 inches (60.3 mm) to 2.875 inches (73 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7200697 | ST1-30L-IHS | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6 mm Element Diameter, 30 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and Stainless Steel Frame). |
Q7200698 | ST1-35L-IHS | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6 mm Element Diameter, 35 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and Stainless Steel Frame). _x000D_ |
Q7200699 | ST1-55L-IHS | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6 mm Element Diameter, 55 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and Stainless Steel Frame). _x000D_ |
Q7200700 | ST1-45L-IHS-COD8 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and Stainless Steel Frame). The wedge features a curvature matching 8in Circumferential Outside Diamater for Inspection of Axial Welds. _x000D_ |
Q7200701 | ST1-60L-IHS-COD8 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and Stainless Steel Frame). The wedge features a curvature matching 8in Circumferential Outside Diamater for Inspection of Axial Welds. _x000D_ |
Q7200702 | ST1-70L-IHS-COD8 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and Stainless Steel Frame). The wedge features a curvature matching 8in Circumferential Outside Diamater for Inspection of Axial Welds. _x000D_ |
Q7200703 | ST1-45L-IHS-COD6 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and Stainless Steel Frame). The wedge features a curvature matching 6in Circumferential Outside Diamater for Inspection of Axial Welds. _x000D_ |
Q7200704 | ST1-60L-IHS-COD6 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and Stainless Steel Frame). The wedge features a curvature matching 6in Circumferential Outside Diamater for Inspection of Axial Welds. _x000D_ |
Q7200705 | ST1-70L-IHS-COD6 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and Stainless Steel Frame). The wedge features a curvature matching 6in Circumferential Outside Diamater for Inspection of Axial Welds. _x000D_ |
Q7100010 | ST1-34S-IHC | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6 mm Element Diameter, 34 degree Refracted Angle in Steel, Shear Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge generates a 23.7 degree Incident Angle. _x000D_ |
Q7200714 | ST1-45L-IHC-COD8 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 8 inches (203.2 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7200716 | ST1-70L-IHC-COD8 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 8 inches (203.2 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_ |
Q7200717 | ST1-45L-IHC-COD6 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6 inches (152.4 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_ |
Q7200718 | ST1-60L-IHC-COD6 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6 inches (152.4 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_ |
Q7200719 | ST1-70L-IHC-COD6 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6 inches (152.4 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_ |
Q7000149 | ST1-60L-IHC-COD7 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 7 inches (177.8 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_ |
Q7000150 | ST1-70L-IHC-COD7 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 7 inches (177.8 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_ |
Q7000151 | ST1-70L-IHC-AID6 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6 inches (152.4 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_ |
Q7000152 | ST1-70L-IHC-AID4.5 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 4.5 inches (114.3 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_ |
Q7000153 | ST1-60L-IHC-AID6 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6 inches (152.4 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_ |
Q7000154 | ST1-60L-IHC-AID4.5 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 4.5 inches (114.3 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_ |
Q7000155 | ST1-60L-IHC-AID3.5 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6 mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching a 3.5 inches (88.9mm) Axial Inside Diameter (AID) Pipe for Circumferential Welds. This wedge is not compatible with Olympus scanners. _x000D_ |
Q7000156 | ST1-70L-IHC-AID3.5 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching a 3.5 inches (88.9mm) Axial Inside Diameter (AID) Pipe for Circumferential Welds. This wedge is not compatible with Olympus scanners. _x000D_ |
Q7000159 | ST1-60L-IHC-AID21 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 21 inches (533.4 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. |
Q7000160 | ST1-60L-IHC-AID19 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 19 inches (482.6 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_ |
Q7000161 | ST1-60L-IHC-AID16 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 16 inches (406.4 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_ |
Q7000162 | ST1-70L-IHC-AID21 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 21 inches (533.4 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_ |
Q7000163 | ST1-70L-IHC-AID19 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 19 inches (482.6 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_ |
Q7000164 | ST1-70L-IHC-AID16 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 16 inches (406.4 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_ |
Q7200855 | ST1-75L-IHS | Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 75 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). |
Q7000170 | ST1-70L-IHC-AID18 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 18 inches (457.2 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_ |
Q7000171 | ST1-60L-IHC-AID18 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 18 inches (457.2 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_ |
Q7000172 | ST1-45L-IHC-AID18 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 18 inches (457.2 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_ |
Q7100011 | ST1-60L-IHC-COD10 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10 inches (254 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100012 | ST1-70L-IHC-COD10 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10 inches (254 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100013 | ST1-60L-IHC-COD20 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100014 | ST1-60L-IHC-COD18 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 18 inches (457.2 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100015 | ST1-60L-IHC-COD16 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 16 inches (406.4 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100016 | ST1-60L-IHC-COD14 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100017 | ST1-60L-IHC-COD12 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12 inches (304.8 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100018 | ST1-70L-IHC-COD20 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100019 | ST1-70L-IHC-COD18 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 18 inches (457.2 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100020 | ST1-70L-IHC-COD14 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100023 | ST1-45L-IHC-AOD6.625 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6.625 inches (168.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7100024 | ST1-60L-AOD14 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7100025 | ST1-70L-AOD14 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7100026 | ST1-45L-AOD14 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7100027 | ST2-35L-IHC | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 35° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). |
Q7100028 | ST1-45L-IHC-AID19.5 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 19.5 inches (495.3 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. |
Q7100029 | ST1-60L-IHC-AID19.5 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 19.5 inches (495.3 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. |
Q7100030 | ST1-70L-IHC-AID19.5 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 19.5 inches (495.3 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. |
Q7100031 | ST1-60L-IHC-COD11.752 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 11,752 inches (298,5 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100032 | ST1-65L-IHC-COD11.752 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 65° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 11,752 inches (298,5 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100033 | ST1-65L-IHC-COD12 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 65° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12 inches (304,8 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7000211 | ST1-50L-IHC-COD3.5 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 3.5 inches (88.9 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7000212 | ST1-50L-IHC-COD4 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 4 inches (101.6 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7000214 | ST1-0L-IH-AOD1.66-COBRA | Custom Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics, 0 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.315 inches (33.4 mm) to 1.66 inches (42.2 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
Q7000215 | ST1-0L-IH-AOD1.9-COBRA | Custom Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics, 0 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching from 1.66 inches (42.2 mm) to 1.9 inches (48.3 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
Q7000216 | ST1-0L-IH-AOD2.375-COBRA | Custom Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics, 0 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching from 1.9 inches (48.3 mm) to 2.375 inches (60.3 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
Q7000219 | ST1-35L-IHC | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 35° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). |
Q7201184 | ST1-60L-CID35.25 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 35.25 inches (895.4 mm) Circumferential Inside Diameter (CID) Pipe for inspection of Longitudinal Welds. |
Q7100044 | ST1-70L-IHC-CID35.25 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 35.25 inches (895.4 mm) Circumferential Inside Diameter (CID) Pipe for inspection of Longitudinal Welds. |
Q7100048 | ST1-60L-IH-AOD6.625-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 6.625 in. (168.27 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
Q7100049 | ST1-70L-IH-AOD6.625-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 6.625 in. (168.27 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
Q7100050 | ST1-80L-IH-AOD6.625-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 6.625 in. (168.27 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
Q7000242 | ST1-45S-IHC-AL-SA | Custom Wedge for Conventional TOFD UT probe, Panametrics type, 3 or 6mm element diameter, 45 degree shear wave in Aluminum, with IHC option (irrigation holes and carbides), Short Approach |
Q7000284 | ST1-80L-IHC-AOD4.5 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 80° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 4.5 inches (114.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_ |
Q7000306 | ST1-45L-IHC-COD12 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12 inches (304.8 mm) Ci |
Q7201378 | ST1-45L-HDPE-WHC-AOD10 | Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 45 degree longitudinal wave in High Density Polyethylene (HDPE), with WHC option (Water column, holes and carbides). The wedge features a curvature matching 10in (254mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds |
Q7201379 | ST1-60L-HDPE-WHC-AOD10 | Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 60 degree longitudinal wave in High Density Polyethylene (HDPE), with WHC option (Water column, holes and carbides). The wedge features a curvature matching 10in (254mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds |
Q7000307 | ST1-70L-AOD10.75 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10.75 inches (273.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7201518 | ST1-65L-IHS-COD10 | Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides in rexolite, no ring). The wedge features a curvature matching 10 inches (254 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100061 | ST1-75L-HDPE-WHC | Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 75 degree longitudinal wave in High Density Polyethylene (HDPE), with WHC option (Water column, holes and carbides). |
Q7100068 | ST1C-ULT-45L-IHC | Custom Wedge made of Ultem for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides) |
Q7000409 | ST2-60L-IHC-AOD18 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 18 inches (457.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7000410 | ST2-45L-IHC-AOD18 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 18 inches (457.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7000411 | ST2-60L-IHC-AOD14 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7000412 | ST2-45L-IHC-AOD14 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7100069 | ST1-45L-IHC-COD10 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10 inches (254 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100070 | ST1-60L-IHC-COD4.5 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12.75 inches (323.9 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100071 | ST1-60L-IHC-COD12.75 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12.75 inches (323.9 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100072 | ST1-70L-IHC-COD4.5 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 4.5 inches (114.3 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100073 | ST1-70L-IHC-COD12.75 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12.75 inches (323.9 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100074 | ST1-60L-IHC-COD6.625 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6.625 inches (168.3 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7201792 | ST1C-ULT-60L-IHC | Custom Wedge made of Ultem for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides) |
Q7201793 | ST1C-ULT-70L-IHC | Custom Wedge made of Ultem for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides) |
Q7100083 | ST1-80L-IHC-AOD5 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 80° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching from 4 inches (101.6 mm) to 5 inches (127 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. |
Q7100084 | ST1-45L-IHC-COD6.625 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6.625 inches (168.3 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100085 | ST1-45L-IHC-COD8.625 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 8.625 inches (219.1 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100086 | ST1-45L-IHC-COD10.75 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 8.625 inches (219.1 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100087 | ST1C-VES-45L-IHC | Custom Wedge made of Vespel for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides) |
Q7100088 | ST1C-VES-60L-IHC | Custom Wedge made of Vespel for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides) |
Q7100089 | ST1C-VES-70L-IHC | Custom Wedge made of Vespel for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides) |
Q7100090 | ST1-70L-CUNI-IH-AOD4.5-Cobra | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in CuNi, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 4 in. (101.6 mm) to 4.5 in. (114.3 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
Q7100091 | ST1-80L-CUNI-IH-AOD4.5-Cobra | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in CuNi, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 4 in. (101.6 mm) to 4.5 in. (114.3 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
Q7100092 | ST1-72L-IHC | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 72° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). |
Q7100093 | ST1-60L-IHC-COD10.75 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10.75 inches (273.1 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100094 | ST1-70L-IHC-COD6.625 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6.625 inches (168.3 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100095 | ST1-70L-IHC-COD10.75 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10.75 inches (273.1 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100096 | ST2-60L-IHC-AID6.96 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6.96 inches (176.8 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. |
Q7100097 | ST2-60L-IHC-AID3.3 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 3.3 inches (83.8 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. |
Q7100098 | ST1-70L-IHC-COD24 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 24 inches (609.6 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100099 | ST1-70L-IHC-COD4 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 4 inches (101.6 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7100100 | ST1-65L-IHC-COD12.75 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 65° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12.75 inches (323.9 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Q7202099 | ST1-70L-IH-AOD5.563-COBRA | Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 5.563 in. (141.30 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. |
Q7100101 | ST1-45L-IHC-COD20 | Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. |
Cáp kết nối và bộ tiền khuếch đại khi kiểm tra TOFD
Một số ứng dụng siêu âm yêu cầu bổ sung bộ tiền khuếch đại (Pre-amplifier riêng) biệt cho thiết bị dò khuyết tật tiêu chuẩn, thiết bị đo độ dày hoặc các thiết bị khác để tăng cường tín hiệu và đạt được tín hiệu phản hồi tối ưu. Có thể thấy các yêu cầu này khi áp dụng kiểm tra TOFD cho các ứng dụng công nghiệp có liên quan đến các phần dày của vật liệu có sự suy giảm siêu âm hoặc tán xạ siêu âm, chẳng hạn như các mối hàn thép, thép Austenit, đồng thau, đồng, cao su, sợi thủy tinh hoặc vật liệu tổng hợp khác. Khi sử dụng bộ tiền khuếch đại, cần chú ý tới các thông tin an toàn để tránh làm hỏng thiết bị. Thông tin về bộ tiền khuếch đại tham khảo thêm tại đường link.
Mã thiết bị | Part Number | SL | 설명하다 |
U8800517 | C174-LM-UDOT-5M | 2 | Cáp Lemo-Microdot để kết nối trực tiếp đầu dò tới thiết bị siêu âm (Sử dụng khi không dùng kèm bộ tiền khuếch đại).
CABLE LEMO-00 MALE 180° TO u-DOT 180°, 5M LONG COAXIAL RG174 |
U8800022 | C174-LM-L90M-5M | 5 | Cáp lemo-lemo kết nối trực tiếp bộ tiền khuếch đại tới đầu dò.
CABLE LEMO-00 MALE 90° TO LEMO-00 MALE 180°,5M LONG COAXIAL RG174. |
U8800690 | C174-LM-UDOT-0.45M | 3 | Cáp lemo-microdot ngắn, kết nối đầu dò tới bộ tiền khuếch đại.
CABLE LEMO-00 MALE 180° to u-DOT 180°, 0.45 M |
Bộ tiền khuếch đại cho TOFD (Pre-Apmlifier) | |||
U8779091 | 5682-KIT02 | 1 | 5682 preamplifier, one 5m UT probe cable (LEMO 00 to LEMO 00), one 0.6m UT probe cable (LEMO 00 to Microdot), one 5m UT probe cable (LEMO 00 to Microdot), one 5 m power supply cable linking to OmniScan, belt case, bracket to attach the 5682 to HSMT-type scanners |