팔꿈치 FlexoFORM용 위상 배열 스캐너

Name: Bộ quét Phased Array kiểm tra ống elbow FlexoFORM
Brand: VISCO NDT
SKU: FlexoFORM
Availability: InStock
Rating: 5 (1 reviews)

Bộ quét kiểm tra siêu âm Phased Array đầy tính sáng tạo FlexoFORM làm các thử thách khi kiểm tra ăn mòn cho các ống elbow, ống cong trở nên dễ dàng hơn bao giờ hết. Khả năng phù hợp với nhiều ứng dụng khi sử dụng đầu dò kiểm tra Phased Array dạng dẻo để quét cả diện tích bề mặt của ống ngay cả ở các khúc cong.

The innovative FlexoFORM scanner makes challenging pipe elbow corrosion inspection easier. The scanner’s flexible phased array technology makes it possible to use a single probe to cover the entire range of pipe elbow diameters. View in Olympus website (English).

견적 문의

SKU: FlexoFORM 카테고리: 부식 시험, 테스트 파이프라인, 올림포스 산, 위상 배열(PAUT), 초음파 액세서리, 초음파(UT) 태그: Elbow, FlexoFORM, kiểm tra siêu âm quét dọc ống, 파우트, 위상 배열, Quét siêu âm elbow

설명
동영상

Sức mạnh đến từ sự mềm dẻo

Các ống cong, khuỷu ống dễ bị hư hại từ các tác động như ăn mòn do dòng chảy tăng tốc (FAC) nhưng việc kiểm tra chúng là một thách thức vì hình dạng của các ống elbow thay đổi từ lồi sang lõm cũng như có nhiều đường kính ống khác nhau. Khi kết hợp với nêm nước, giải pháp này có thể được sử dụng để thu thập dữ liệu trên các đoạn ống khuỷu tay và ống cong với đường kính từ 4,5 in. OD trở lên với nhiều ưu điểm:

Quét 100% ống elbow
Hình ảnh 2D C-scan trực quan
Dữ liệu thu có mật độ cao (1 mm × 1 mm)
Đo, kiểm tranh, lập bản đồ ăn mòn nhanh độ dày thành ống elbow

Dữ liệu có độ phân giải cao

Bộ quét được thiết kế đế sử dụng với OmniScan® MX2 멋진 SX để phát hiện và đo lường các hư hại hoặc bất thường như đo chiều dày ống còn lại, ăn mòn pitting hay tách lớp trong thành ống. Dữ liệu độ phân giải cao kết hợp với các chế độ hiển thị khác nhau trên thiết bị hoặc trên máy tính (cần OmniPC™ ) cung cấp hình ảnh rõ ràng về tình trạng của các ống elbow giúp việc giải đoán dễ dàng và chính xác hơn.

Các trục quét và lưu dữ liệu được mã hóa theo vị trí và có thể thay đổi sử dụng một nút bấm trên bộ quét để thay đổi vị trí dữ liệu một cách dễ dàng.
Bánh xe từ giữ bộ quét chắc chắn bám vào bề mặt ống, trong khi gioăng bằng xốp tiếp xúc theo bề mặt cong và giữ cột nước bên trong.
Việc sử dụng cột nước làm chất tiếp âm giúp bề mặt có thể dễ dàng phù hợp với cả mặt lồi và lõm trên ống cong, thiết bị và phần mềm trên OmniScan đồng bộ dữ liệu bề mặt với chiều dày đo được.
Các nêm khác nhau được thiết kế để phù hợp với các đường kính ống khác nhau. Gắn đầu dò và nêm phù hợp lên bộ quét là bạn đã sẵn sàng cho công việc.

Quét dọc ống

Cấu hình quét ống này rất hữu dụng khi kiểm tra các ống nhỏ hay khi vùng cần quét tập trung vào một vùng của ống (dưới đáy và mặt trên). Bộ quét ống elbow FlexoFORM khi sử dụng để quét dọc ống sẽ giúp tăng tốc độ kiểm tra lên hàng chục lần.

Quét ống elbow nhỏ

Các nêm bán tự động được thiết kế phù hợp với ống nhỏ từ 101 mm (4.5 in) trở lên. Ở chế độ quét thủ công, có thể kiểm tra vùng bên ngoài (mặt cong ngoài) của các ống elbow có đường kính từ 1.3 in. OD tới 4 in. OD hoặc quét dọc ống để thu được hình ảnh mã hóa C-scans. Các nêm SFA1-SMALL cho ống nhỏ cần kết hợp với Mini-Wheel™ encoder.

Quét tự động

Trong vài ứng dụng cần quét dọc ống thay vì quét vòng quanh ống, nêm SFA1-AUTO phù hợp bộ quét tự động cho các ống từ 220mm (8.625 in.) OD trở lên.

Thông tin đặt hàng/Ordering info

암호	Tên sản phẩm	Mô tả/Description
Q7500062	FlexoFORM	FlexoFORM package with probe and one (1) SFA1 water wedge for 8.625 in. outside diameter. 5 m long cables compatible with current generation of OmniScan and Focus instruments.
Q7500063	FlexoFORM-Kit	FlexoFORM package with probe and six (6) SFA1 water wedges (for 4.5 in., 6.625 in., 8.625 in., 10.75 in., 12.75 in., and 16 in. outside diameters). 5 m long cables compatible with current generation of OmniScan and Focus instruments.
Q3301202	7.5L64-64X7-FA1-P-5-OM	Flexible phased array probe, 7.5 MHz, 64 elements, 1 mm pitch, 7 mm elevation, FA1 case type for the FlexoFORM scanner (SFA1-FLEXO), SFA1-SMALL and SFA1-AUTO wedge series, 5 m cable length, and OmniScan connector.
Q7500067	SFA1-Flexo-OD4.5	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 4.5 inches (114 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500068	SFA1-Flexo-OD5.563	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 5.563 inches (141 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500069	SFA1-Flexo-OD6.625	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 6.625 inches (168 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500070	SFA1-Flexo-OD8.625	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 8.625 inches (219 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500071	SFA1-Flexo-OD10.75	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 8.625 inches (219 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500072	SFA1-Flexo-OD12.75	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 12.75 inches (324 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500073	SFA1-Flexo-OD14	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 14 inches (356 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500074	SFA1-Flexo-OD16	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 16 inches (406 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500075	SFA1-Flexo-OD18	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 18 inches (457 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500076	SFA1-Flexo-OD20	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 20 inches (508 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500077	SFA1-Flexo-OD22	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 22 inches (559 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500078	SFA1-Flexo-OD24	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 24 inches (610 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500079	SFA1-Flexo-OD26	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 26 inches (660 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500080	SFA1-Flexo-OD28	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 28 inches (711 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500081	SFA1-Flexo-OD30	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 30 inches (762 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500082	SFA1-Flexo-OD32	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 32 inches (813 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500083	SFA1-Flexo-OD34	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 34 inches (864 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500084	SFA1-Flexo-OD36	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 36 inches (914 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500085	SFA1-Flexo-OD42	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 42 inches (1067 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500086	SFA1-Flexo-OD48	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 48 inches (1219 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7500087	SFA1-Flexo-Flat	Standard wedge for Flexible array probe FA1 and compatible with FlexoFORM scanner. The wedge is used to generate 0° Longitudinal Waves and features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials.
Q7790124	SFA1-SMALL-KIT-FULL	Kit of 7x SFA1-SMALL water wedge probe holders, 1x FA1 flexible phased array probe and 1x ENC1 mini-wheel encoder with magnetic wheel. Wedge diameters are compatible with 1.3, 1.66, 1.9, 2.375, 2.875, 3.5 and 4 inches outside diameter pipes and elbow extrados. The flexible PA probe is 7.5MHz, 64 elements, 7mm elevation, 1mm pitch, for a total apperture length of 64mm. The kit also includes irrigation tube and cable protection sleeve. Cable lenghts are 5m. The probe and encoder are compatible with current generation of phased array instruments (Lemo and OM connectors). All packaged in hard carrying case.
Q7790125	SFA1-SMALL-KIT	Kit of 7x SFA1-SMALL water wedge probe holders. Wedge diameters are compatible with 1.3, 1.66, 1.9, 2.375, 2.875, 3.5 and 4 inches outside diameter pipes and elbow extrados. The kit also includes irrigation tube and cable protection sleeve. Cable lenghts are 5m. All packaged in hard carrying case.
Q7500088	SFA1-Auto-OD8.625	Standard wedge for Flexible array probe FA1 and compatible with MapROVER and SteerROVER scanners. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 8.625 inches (219 mm) Outside Diameter (OD) for inspection of extrados and intrados of pipe elbows. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials. Not Compatible with FlexoFORM scanner.
Q7500089	SFA1-Auto-OD10.75	Standard wedge for Flexible array probe FA1 and compatible with MapROVER and SteerROVER scanners. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 10.75 inches (273 mm) Outside Diameter (OD) for inspection of pipes. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials. Not Compatible with FlexoFORM scanner.
Q7500090	SFA1-Auto-OD12.75	Standard wedge for Flexible array probe FA1 and compatible with MapROVER and SteerROVER scanners. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 12.75 inches (324 mm) Outside Diameter (OD) for inspection of pipes. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials. Not Compatible with FlexoFORM scanner.
Q7500091	SFA1-Auto-OD14	Standard wedge for Flexible array probe FA1 and compatible with MapROVER and SteerROVER scanners. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 14 inches (356 mm) Outside Diameter (OD) for inspection of pipes. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials. Not Compatible with FlexoFORM scanner.
Q7500092	SFA1-Auto-OD16	Standard wedge for Flexible array probe FA1 and compatible with MapROVER and SteerROVER scanners. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 16 inches (406 mm) Outside Diameter (OD) for inspection of pipes. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials. Not Compatible with FlexoFORM scanner.
Q7500093	SFA1-Auto-OD18	Standard wedge for Flexible array probe FA1 and compatible with MapROVER and SteerROVER scanners. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 18 inches (457 mm) Outside Diameter (OD) for inspection of pipes. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials. Not Compatible with FlexoFORM scanner.
Q7500094	SFA1-Auto-OD20	Standard wedge for Flexible array probe FA1 and compatible with MapROVER and SteerROVER scanners. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 20 inches (508 mm) Outside Diameter (OD) for inspection of pipes. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials. Not Compatible with FlexoFORM scanner.
Q7500095	SFA1-Auto-OD22	Standard wedge for Flexible array probe FA1 and compatible with MapROVER and SteerROVER scanners. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 22 inches (559 mm) Outside Diameter (OD) for inspection of pipes. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials. Not Compatible with FlexoFORM scanner.
Q7500096	SFA1-Auto-OD24	Standard wedge for Flexible array probe FA1 and compatible with MapROVER and SteerROVER scanners. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 24 inches (610 mm) Outside Diameter (OD) for inspection of pipes. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials. Not Compatible with FlexoFORM scanner.
Q7500097	SFA1-Auto-OD26	Standard wedge for Flexible array probe FA1 and compatible with MapROVER and SteerROVER scanners. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 26 inches (660 mm) Outside Diameter (OD) for inspection of pipes. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials. Not Compatible with FlexoFORM scanner.
Q7500098	SFA1-Auto-OD28	Standard wedge for Flexible array probe FA1 and compatible with MapROVER and SteerROVER scanners. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 28 inches (711 mm) Outside Diameter (OD) for inspection of pipes. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials. Not Compatible with FlexoFORM scanner.
Q7500099	SFA1-Auto-OD30	Standard wedge for Flexible array probe FA1 and compatible with MapROVER and SteerROVER scanners. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 30 inches (762 mm) Outside Diameter (OD) for inspection of pipes. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials. Not Compatible with FlexoFORM scanner.
Q7500100	SFA1-Auto-OD32	Standard wedge for Flexible array probe FA1 and compatible with MapROVER and SteerROVER scanners. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 32 inches (813 mm) Outside Diameter (OD) for inspection of pipes. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials. Not Compatible with FlexoFORM scanner.
Q7500101	SFA1-Auto-OD34	Standard wedge for Flexible array probe FA1 and compatible with MapROVER and SteerROVER scanners. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 34 inches (864 mm) Outside Diameter (OD) for inspection of pipes. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials. Not Compatible with FlexoFORM scanner.
Q7500102	SFA1-Auto-OD36	Standard wedge for Flexible array probe FA1 and compatible with MapROVER and SteerROVER scanners. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 36 inches (914 mm) Outside Diameter (OD) for inspection of pipes. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials. Not Compatible with FlexoFORM scanner.
Q7500103	SFA1-Auto-OD42	Standard wedge for Flexible array probe FA1 and compatible with MapROVER and SteerROVER scanners. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 42 inches (1067 mm) Outside Diameter (OD) for inspection of pipes. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials. Not Compatible with FlexoFORM scanner.
Q7500104	SFA1-Auto-OD48	Standard wedge for Flexible array probe FA1 and compatible with MapROVER and SteerROVER scanners. The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 48 inches (1219 mm) Outside Diameter (OD) for inspection of pipes. The wedge also features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials. Not Compatible with FlexoFORM scanner.
Q7500105	SFA1-Auto-Flat	Standard wedge for Flexible array probe FA1 and compatible with MapROVER and SteerROVER scanners. The wedge is used to generate 0° Longitudinal Waves and features an 9 mm high water column allowing inspection of up to 30 mm thick carbon steel materials. Not compatible with FlexoFORM scanner.
Q7500106	SFA1-Small-OD1.3	Standard wedge for Flexible array probe FA1 for manual inspection of small pipes or elbow extrados (not compatible with elbow intrados). The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 1.315 inches (33.4 mm) Outside Diameter (OD) for inspection of elbow extrados. The wedge also features an 11 mm high water column allowing inspection of up to 35 mm thick carbon steel materials. Compatible with the Mini-Wheel encoder. Not compatible with FlexoFORM scanner.
Q7500107	SFA1-Small-OD1.66	Standard wedge for Flexible array probe FA1 for manual inspection of small pipes or elbow extrados (not compatible with elbow intrados). The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 1.66 inches (42 mm) Outside Diameter (OD) for inspection of elbow extrados. The wedge also features an 11 mm high water column allowing inspection of up to 35 mm thick carbon steel materials. Compatible with the Mini-Wheel encoder. Not compatible with FlexoFORM scanner.
Q7500108	SFA1-Small-OD1.9	Standard wedge for Flexible array probe FA1 for manual inspection of small pipes or elbow extrados (not compatible with elbow intrados). The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 1.9 inches (48 mm) Outside Diameter (OD) for inspection of elbow extrados. The wedge also features an 11 mm high water column allowing inspection of up to 35 mm thick carbon steel materials. Compatible with the Mini-Wheel encoder. Not compatible with FlexoFORM scanner.
Q7500109	SFA1-Small-OD2.375	Standard wedge for Flexible array probe FA1 for manual inspection of small pipes or elbow extrados (not compatible with elbow intrados). The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 2.375 inches (60 mm) Outside Diameter (OD) for inspection of elbow extrados. The wedge also features an 11 mm high water column allowing inspection of up to 35 mm thick carbon steel materials. Compatible with the Mini-Wheel encoder. Not compatible with FlexoFORM scanner.
Q7500110	SFA1-Small-OD2.875	Standard wedge for Flexible array probe FA1 for manual inspection of small pipes or elbow extrados (not compatible with elbow intrados). The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 2.875 inches (73 mm) Outside Diameter (OD) for inspection of elbow extrados. The wedge also features an 11 mm high water column allowing inspection of up to 35 mm thick carbon steel materials. Compatible with the Mini-Wheel encoder. Not compatible with FlexoFORM scanner.
Q7500111	SFA1-Small-OD3.5	Standard wedge for Flexible array probe FA1 for manual inspection of small pipes or elbow extrados (not compatible with elbow intrados). The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 3.5 inches (89 mm) Outside Diameter (OD) for inspection of elbow extrados. The wedge also features an 11 mm high water column allowing inspection of up to 35 mm thick carbon steel materials. Compatible with the Mini-Wheel encoder. Not compatible with FlexoFORM scanner.
Q7500112	SFA1-Small-OD4	Standard wedge for Flexible array probe FA1 for manual inspection of small pipes or elbow extrados (not compatible with elbow intrados). The wedge is used to generate 0° Longitudinal Waves and features a curvature matching 4 inches (101.6 mm) Outside Diameter (OD) for inspection of elbow extrados. The wedge also features an 11 mm high water column allowing inspection of up to 35 mm thick carbon steel materials. Compatible with the Mini-Wheel encoder. Not compatible with FlexoFORM scanner.

카테고리

필드