チェーンベルト付きステンレス鋼管のチェーンスキャナー半自動超音波検査

The ChainSCANNER facilitates the manual inspection of pipes with outside diameters of 45 mm to 965 mm (1.75 in. to 38 in.), offering the possibility for two-axis encoding. The scanner, which is held by chain links instead of magnetic wheels, is able to inspect ferromagnetic or nonferromagnetic surfaces. The chain links also help ensure a straight displacement of the scanner by eliminating steering problems. Finally, it is useful when the area around the pipe is difficult to access as the scanner can be rotated around the pipe using the chain links.

Ứng dụng chính/Main applications:

• Circumferential-pipe weld inspections with phased array, TOFD, or conventional UT
• Corrosion mapping of small areas with phased array or conventional UT (using XY; 2 encoder models)

Tính năng/Features

• Standard configuration using one or two probes and optional configuration using four probes for TOFD, phased array, or pulse-echo inspections.
• Pipe range with outside diameters from 45 mm to 965 mm (1.75 in. to 38 in.)
• Encoded manual scan on one or two axis (depend on the model)
• Ergonomic handle to protect encoder connectors and provide cable management
• Independent chain links mounted on bearings wheels coated with urethane for smooth rolling
• Easy clamping device for quick scanner positioning
• Spring-loaded probe holders ensuring good probe contact in any scanner position or orientation
• The majority of adjustments can be made without the use of tools
• Compatible with the OmniScan®, the TomoScan FOCUS LT™ (with optional adaptor), and other instruments using the appropriate encoder cable

Phụ kiện tiêu chuẩn/Standard Inclusions

• Main module with a scan-axis encoder
• Chain links for 5 in., 16 in., or 38 in. pipe OD (depending on model) with quick-release adjustable buckle
• 5 m encoder cable for OmniScan
• 450 mm (17.7 in.) probe-holder bar
• Two spring-loaded probe holders with adjustable TOFD-P/E yokes
• Two spring-loaded probe holders with adjustable phased array yokes
• Probe-positioning system with lead screw adjustment
• 5 m divisible cable conduit (19 mm ID)
• Irrigation tubes and fittings
• CHAIN™ scanner tool
• Carrying case

Note: Probes and wedges are not included with the scanner.

Optional accessories/Phụ kiện tùy chọn

Thông số kỹ thuật/Specifications

Length in scan axis （んん）	Width （んん）	Height （んん）	重さ (kg)
114	75	84	1

Note: specifications above apply to the main module

Encoder resolution:
Circumferential (X) axis: 19.2 steps/mm
Longitudinal (Y) axis: 56.7 steps/mm

Thông tin đặt hàng/Ordering info

Lựa chọn bộ quét/Scanner Selection

U8750041	CHAINSCAN-XY38	CHAIN Scanner-XY38: Hand scanner for pipe inspection with encoded X-axis and Y-axis for pipe outside diameters from 1.75 inches to 38 inches. Includes two spring-loaded arms, two yokes for TOFD/PE UT probes, two yokes for Phased Array probes, 5 m encoder cable for OmniScan, 5m divisable cable protection, irrigation tubes and fittings. Probes and wedges are not included.
U8779370	ChainScan-SP-Basic	Basic spare part kit for the CHAIN scanner including: Lead screw and leaver for buckle , Wedge pivot buttons, Dovetail nuts, Specific tool, Plastic wheel, different types of wing screws and screws.

Phụ kiện/Common accessories

U8750037	CHAINSCAN-A-MOUSE	Extra part package to allow using the Chain Scanner as a mouse scanner with magnetic wheels holding system instead of chain links. Includes: Front attachement part, brake handle, 4 magnetic wheels
U8775129	CHAINSCAN-A-SBAR	20cm long probe holder bar and screw kit for Chain Scanner
U8775128	CHAINSCAN-A-4PROBE	Extra part package to allow inspection using 4 probes on the Chain Scanner. Includes: 2 side frame arms, one 450mm bar, 2 magnetic wheels, 2 handles, 2 TOFD yokes
U8775162	CHAINSCAN-A-CABLE01	CHAIN Scanner 5m long encoder cable with plastic cover handle

Phụ kiện thay thế/Replacement parts

U8775162	CHAINSCAN-A-CABLE01	CHAIN Scanner 5m long encoder cable with plastic cover handle
U8750042	CHAINSCAN-A-LGLINK	Chain Scanner long link. Required on pipe OD greater than 9.6 in.
U8775127	CHAINSCAN-A-SLINK	Chain Scanner short link. Required on pipe OD less than 9.6 in.
U8775128	CHAINSCAN-A-4PROBE	Extra part package to allow inspection using 4 probes on the Chain Scanner. Includes: 2 side frame arms, one 450mm bar, 2 magnetic wheels, 2 handles, 2 TOFD yokes
U8775130	CHAINSCAN-A-TOOL	Chain Scanner universal tool
U8775145	ChainScan-SP-ENC	Chain Scanner encoder for longitudinal “Y” axis
U8775146	Chainscan-A-LScrew38	Chain Scanner 38cm lead screw to be used on the XY option with the longitudinal “Y” encoder
U8775161	ChainScan-A-FBar550	CHAIN Scanner 550mm long frame bar
U8775162	CHAINSCAN-A-CABLE01	CHAIN Scanner 5m long encoder cable with plastic cover handle
U8775167	CHAINSCAN-A-KNOB	Removable thumb screw for Chain Scanner
U8775178	CHAINSCAN-A-YCABLE1M	Extension cable for CHAIN scanner Y encoder. 1m long.
U8775189	CHAINSCAN-A-PWHEEL	Plastic wheel for CHAIN Scanner and HydroFORM
U8775190	CHAINSCAN-A-TRANSVERS	Bracket to pivot a CHAIN Scanner yoke from 0 to 90 deg.
U8775196	CHAINSCAN-A-SWNOSE	Swivel nose to be installed on the front of a CHAIN Scanner. Suited to hold one probe holder bar and allow rotation allong the long axis of the bar.
U8775197	CHAINSCAN-A-BAR-10cm	10cm long probe holder bar for CHAIN Scanner.
U8775198	CHAINSCAN-A-BUTTON-8mm	8mm diameter button for CHAIN Scanner arm.
U8775199	CHAINSCAN-A-BUTTON-5mm	5mm diameter button for CHAIN Scanner arm.
U8775200	CHAINSCAN-A-ARM-LD8mm	Large dropped arm sets for CHAIN Scanner with 8mm buttons.
U8775205	CHAINSCAN-A-CRANK	Crank handle for Y axis indexation on CHAIN scanners. NOTE: Will only fit if the main red knob of the CHAIN Scanner has the mounting holes. If not, a “CHAINscan-A-MainKnob” must also be ordered.
U8775206	CHAINSCAN-A-MAINKNOB	Main big red knob for Y axis indexation on CHAIN scanners. Features mounting holes for crank handle instalation.
U8775210	CHAINSCAN-A-STABILIZER	Chain scanner arm stabilizer kit. Includes a magnetic wheel block and the holder to mount on the scanner arm.
U8775224	CHAINSCAN-SP-CART	CHAIN Scanner main cart replacement module. Include X encoder, cart module and shafts.
U8775259	CHAINSCAN-A-HANDLE	Handle for CHAIN Scanner. To be mounted on dovetail links or frame bar.
U8775261	CHAINSCAN-A-ARM-LPA	Large, 63.5mm long arm sets for CHAIN Scanner with 8mm buttons for PA probe. IMPORTANT NOTE: Will fit on original thinker rear member with 17.8×10.6mm cross section.
U8775262	CHAINSCAN-A-ARM-SPA	Slim, 63.5mm long arm sets for CHAIN Scanner with 8mm buttons for PA probe. IMPORTANT NOTE: Will fit on newer slim rear member with 17.8×10.6mm cross section.
U8775263	CHAINSCAN-A-ARM-LUT	Large, 27.9mm long arm sets for CHAIN Scanner with 5mm buttons for UT probe. IMPORTANT NOTE: Will fit on original thinker rear member with 17.8×10.6mm cross section.
U8775264	CHAINSCAN-A-ARM-SUT	Slim, 27.9mm long arm sets for CHAIN Scanner with 5mm buttons for UT probe. IMPORTANT NOTE: Will fit on newer slim rear member with 8.7×6.5mm cross section.
U8779370	CHAINSCAN-SP-BASIC	Basic spare part kit for the CHAIN scanner including: Lead screw and leaver for buckle , Wedge pivot buttons, Dovetail nuts, Specific tool, Plastic wheel, different types of wing screws and screws.
U8779383	CHAINSCAN-A-MWHEEL	Magnetic wheel for CHAIN Scanner and HydroFORM

 

Bộ Chain Scanner cho kiểm tra mối hàn/Chain Scanner for Weld inspection

 

STT/No#	ID	品番	説明
1	U8775224	CHAINSCAN-SP-CART	CART The Chain Scanner cart is paired with urethane wheels for smooth, unobstructed motion upon scan surfaces. CHAIN Scanner main cart module. Include X encoder, cart module and shafts.
2	U8775161	ChainScan-A-FBar550	FRAME BAR 45 cm (17.7 in) and 20 cm (7.9 in) frame bar lengths are included with this kit to facilitate various scanner configurations. CHAIN Scanner 550mm long frame bar
3.1	U8775261	CHAINSCAN-A-ARM-LPA	SLIP JOINT PROBE HOLDERS Maintain constant contact between the inspection surface and the probe with low profile, spring-loaded probe holders. Large, 63.5mm long arm sets for CHAIN Scanner with 8mm buttons for PA probe. IMPORTANT NOTE: Will fit on original thinker rear member with 17.8×10.6mm cross section.
3.2	U8775262	CHAINSCAN-A-ARM-SPA	SLIP JOINT PROBE HOLDERS Maintain constant contact between the inspection surface and the probe with low profile, spring-loaded probe holders.Slim, 63.5mm long arm sets for CHAIN Scanner with 8mm buttons for PA probe. IMPORTANT NOTE: Will fit on the newer slim rear member with 8.7×6.5mm cross section.
3.3	U8775263	CHAINSCAN-A-ARM-LUT	Large, 27.9mm long arm sets for CHAIN Scanner with 5mm buttons for UT probe. IMPORTANT NOTE: Will fit on original thinker rear member with 17.8×10.6mm cross section.Origin: CA
3.4	U8775264	CHAINSCAN-A-ARM-SUT	Slim, 27.9mm long arm sets for CHAIN Scanner with 5mm buttons for UT probe. IMPORTANT NOTE: Will fit on newer slim rear member with 8.7×6.5mm cross section.Origin: CA
4	U8775210	CHAINSCAN-A-STABILIZER	STABILIZER WHEEL Maintain level and balance of the scanner with a magnetized stabilizer wheel. Chain scanner arm stabilizer kit. Includes a magnetic wheel block and the holder to mount on the scanner arm.
5	U8775127	CHAINSCAN-A-SLINK	SHORT LINK Various amounts of single wheel short links are included in each kit configuration. Chain Scanner short link. Required on pipe OD less than 9.6 in.Origin: CA
6	U8150457	CHAINSCAN-SP-SHORTLINKDOVETAIL CHAINSCAN-SP-SHORT	SHORT LINK WITH DOVETAIL Utilize the short link with dovetail to mount accessories such as cable management to the chain system. Chain Scanner Short link Dove tail.
7	U8150587	25AA2638	CATCH LINK Works in conjunction with the buckle to mount the scanner to the pipe/tube. Chain Scanner Catch Link
8	U8750042	CHAINSCAN-A-LGLINK	LONG LINK Equivalent to (approx.) 3 short links, the long link is used for larger diameter scans. Chain Scanner long link. Required on pipe OD greater than 9.6 in.
9	U8775276	25AA2249	BUCKLE The buckle connects to the catch link to complete the chain system. Adjust the buckle to control the chain’s tension around the pipe/tube exterior. Buckle assembly for Chain Scanner