溶接検査用TOFD装置

Name: Thiết bị TOFD cho kiểm tra mối hàn
Brand: VISCO NDT
SKU: OMNISCAN-TOFD
Availability: InStock
Rating: 5 (1 reviews)

Mô-đun siêu âm thông thường 2 kênh OmniScan MX2 (UT2) có thể được sử dụng để kiểm tra TOFD (Nhiễu xạ thời gian bay). Thiết bị có điện áp xung cao hơn (340 V), tốc độ PRF cao và tỷ lệ tín hiệu trên nhiễu được cải thiện rất nhiều.

The OmniScan MX2 2-channel conventional ultrasound module (UT2) can be used for TOFD (Time-of-Flight Diffraction) inspections. It features higher pulser voltages (340 V), increased PRF capabilities, and dramatically improved signal-to-noise ratio.

見積もりの連絡先

商品コード: OMNISCAN-TOFD カテゴリー: 腐食試験, 溶接をチェック, オリンパス, 欠陥検出, 超音波（UT）, TOFD タグ: Siêu âm nhiễu xạ thời gian truyền sóng, TOFD

説明

Tổng quan

Mặc dù siêu âm nhiễu xạ thời gian bay (TOFD) có thể được sử dụng cho nhiều ứng dụng khác nhau, công dụng chính của nó là kiểm tra mối hàn nhanh chóng. Kỹ thuật kiểm tra còn được gọi là kỹ thuật quét TOFD vuông góc. Kể từ khi TOFD được giới thiệu vào những năm 1970, việc sử dụng kỹ thuật kiểm tra không phá hủy đáng tin cậy và dễ dàng này đã tăng đều. Có thể thực hiện kiểm tra thủ công với TOFD, tuy nhiên, kỹ thuật này thường được thực hiện kết hợp với thiết bị lưu dữ liệu, bộ mã hóa hoặc bộ quét công nghiệp. Để đạt có được sự tuân thủ theo code ở Bắc Mỹ, TOFD thường được kết hợp với các kỹ thuật kiểm tra siêu âm mảng theo phương pháp xung-dội để kiểm tra được các vùng mũ và chân của mối hàn.

TOFD có thể được sử dụng độc lập hoặc kết hợp với các kỹ thuật siêu âm khác. Một số kỹ thuật kiểm tra TOFD phổ biến nhất là:

TOFD sử dụng độc lập
TOFD sử dụng với nhiều kênh
TOFD theo kiểu xung-dội / sóng mặt
TOFD kết hợp với PAUT
Kỹ thuật quét TOFD song song
TOFD một phía (Single-sided TOFD)

Lý thuyết TOFD cơ bản

TOFD thường được thực hiện bằng cách sử dụng sóng dọc làm phương pháp phát hiện chính. Cảm biến siêu âm được đặt ở mỗi bên của mối hàn. Một cảm biến gửi chùm siêu âm vào vật liệu và cảm biến còn lại nhận được tín hiệu siêu âm phản xạ và nhiễu xạ từ bất liên tục. TOFD có phạm vi bao phủ rộng với một chùm tia đơn bằng cách sử dụng nguyên lý lan truyền chùm siêu âm bên trong nêm và vật liệu được kiểm tra. Khi chùm tia tiếp xúc với bất liên tục hoặc vết nứt, năng lượng nhiễu xạ phản hồi và được truyền theo mọi hướng. Đo thời gian di chuyển (bay) của chùm tia nhiễu xạ cho phép phát hiện và định cỡ bất liên tục chính xác và rất đáng tin cậy, ngay cả khi vết nứt không vuông góc với chùm tia siêu âm. Trong khi kiểm tra TOFD, tín hiệu dạng quét A được thu thập và sử dụng để tạo hình ảnh quét B (mặt bên) của mối hàn. Phân tích được thực hiện ngay trên thiết bị hoặc sử dụng phần mềm trên máy tính, và con trỏ được sử dụng để để đo chiều dài và chiều cao của bất liên tục.

Trong khi TOFD là kỹ thuật nhanh, tương đối hiệu quả, phát hiện được các khuyết tật có hướng và hình dạng bất kỳ và khả năng đánh giá kích thước khuyết tật chính xác, TOFD lại có những mặt hạn chế cố hữu ở các vùng gần mặt trên và mặt dưới của vật liệu. Phased Array bổ xung hoàn hảo cho các hạn chế này và còn cung cấp các thông tin khác giúp cho việc đánh giá khuyết tật chính xác và đơn giản hơn rất nhiều.

Để có các thông tin kỹ thuật chi tiết hơn về kiểm tra TOFD, xin tham khảo đường link.

Ưu điểm của TOFD

Kiểm tra mối hàn với một lần quét
Tốc độ quét rất nhanh
Cài đặt không phụ thuộc vào cấu hình mối hàn, chỉ phụ thuộc chiều dày vật liệu
Đánh giá chính xác kích thước khuyết tật
Nhạy và sử dụng được cho hầu hết các loại khuyết tật khác nhau
Không bị ảnh hưởng nhiều bởi điều kiện bề mặt mối hàn và không yêu cầu cao về chất tiếp âm

Ưu điểm của Phased Array

Giảm thời gian quét và kiểm tra so với chụp ảnh phóng xạ
Kiểm tra toàn bộ các vùng của mối hàn với một lần quét, bổ xung các mặt hạn chế của TOFD
Dễ dàng tìm, phân loại và đánh giá khuyết tật so với siêu âm thường trên OmniScan hoặc sử dụng máy tính
Dữ liệu thu được có đầy đủ A-Scan cùng với hình ảnh C-Scan cho phép thay thế chụp ảnh phóng xạ

Sử dụng OmniScan MX2, X3 và SX khi kiểm tra TOFD

オリンパスオムニスキャン MX2 với mô-đun UT2 và オムニスキャン® SX là những giải pháp mạnh mẽ với chi phí hợp lý khi kiểm tra TOFD. Đại diện cho những phát triển mới nhất về phần mềm và phần cứng, OmniScan SX và mô-đun UT2 cho OmniScan MX2 được thiết kế để kiểm tra mối hàn bằng kỹ thuật TOFD nhanh chóng và dễ dàng. Nhiều cải tiến hiệu suất và tỷ lệ tín hiệu/nhiễu hàng đầu cung cấp cho bạn chất lượng dữ liệu tối ưu để kiểm tra TOFD.

Module siêu âm mới OmniScan MX2 UT2 cung cấp giải pháp mạnh, tiết kiệm để kiểm tra TOFD. Kiểm tra siêu âm nhiễu xạ trở nên dễ dàng và nhanh chóng hơn bao giờ hết.
Việc hỗ trợ tới 8 nhóm kiểm tra cùng với giao diện hiển thị đồng thời nhiều kênh TOFD cùng lúc giúp OmniScan trở thành một thiết bị cơ động, phù hợp cho kiểm tra TOFD độc lập hay kết hợp với PAUT.

デバイスオムニスキャン X3 là phiên bản tiếp theo của OmniScan MX2, với các cải tiến phù hợp cho kiểm tra TOFD chuyên dụng bao gồm:

Menu TOFD độc lập, thao tác nhanh hơn với 4 kênh TOFD có sẵn, giảm tối đa nhu cầu sử dụng bộ Tiền khuếch đại độc lập.
Sử dụng điện áp cao cho cả 4 kênh TOFD.

Các công cụ tích hợp giúp kiểm tra TOFD dễ dàng

Công cụ dạng hỏi đáp hướng dẫn qua các thiết lập cụ thể để kiểm tra TOFD.
Công cụ hiệu chuẩn khoảng cách giữa hai đầu dò (PCS).
Hình ảnh B-scan dễ đọc hơn.
Hiển thị đồng thời nhiều kênh TOFD (trên OmniScan MX2).
Xử lý chuẩn tín hiệu sóng mặt
Tần số lặp lại xung cao hơn (PRF).
Điện áp cao hơn (lên tới 340 V); không cần đến bộ tiền khuếch đại.
Chức năng đồng bộ và làm thẳng sóng bề mặt đã được tối ưu hóa giúp đọc kết quả TOFD dễ dàng. Sóng mặt được tối ưu và làm phẳng cũng cho phép đánh giá độ sâu chính xác hơn.

Dữ liệu TOFD sau khi áp dụng tính năng đồng bộ hóa xung mặt.

Khi kết hợp các ưu điểm trên, bạn có thể thiết lập kiểm tra TOFD nhanh hơn và đơn giản hơn bao giờ hết, giải thích kết quả dễ dàng hơn và đánh giá kích thước khuyết tật chính xác hơn giúp tăng năng suất tổng thể.

Thiết bị và Phụ kiện sử dụng trong kiểm tra TOFD

Thiết bị OmniScan phải được sử dụng với đầu dò, nêm, và phần cứng phù hợp để có thể kiểm tra các cấu hình mối hàn khác nhau theo yêu cầu của khách hàng. Thiết bị hỗ trợ tới 2 kênh TOFD (4 đầu dò) trong một lần quét.
Đầu dò TOFD cùng nêm có nhiều loại hỗ trợ độ dày vật liệu khác nhau.
Thiết bị OmniScan hỗ trợ sẵn cho một kênh TOFD. Không phải sử dụng phần cứng đặc biệt nếu chỉ kiểm tra với 1 kênh TOFD (2 đầu dò).
Khi sử dụng 2 hoặc nhiều hơn kênh tín hiệu TOFD, OmniScan phải sử dụng một bộ chuyển đổi kết nối đến đầu dò và mượn 2 kênh từ 128 kênh của máy Phased Array.
TOFD đòi hỏi phải có một bộ gá đầu dò thích hợp để có thể hoạt động hiệu quả.
Với 2 kênh TOFD, có thể sử dụng bộ gá nhỏ gọn HSMT Compact hỗ trợ tới 2 kênh TOFD cùng lúc (4 đầu dò).
Thông thường, với các mối hàn có chiều dày lớn, phải sử dụng 2 hoặc 3 kênh TOFD để có thể kiểm tra được toàn bộ chiều dày.
Bộ tiền khuếch đại giúp tăng chất lượng tín hiệu khi kiểm tra TOFD với tôn dày hơn.

Lựa chọn đầu dò kiểm tra ToFD theo chiều dày

TOFD thường được ứng dụng để kiểm tra toàn bộ mối hàn hay kiểm tra khảo sát nhanh ăn mòn vật liệu. Trong hầu hết các trường hợp, có thể kiểm tra mối hàn chỉ sử dụng duy nhất một cặp đầu dò TOFD. Phương án đặt đầu dò TOFD cần được thực hiện để đảm bảo độ bao phủ của chùm âm cần cân nhắc một số yếu tố, bao gồm lựa chọn tần số đầu dò dựa trên chiều dày vật liệu kiểm tra. Tần số đầu dò được lựa chọn tương tự như với ứng dụng siêu âm Xung-dội thông thường. Ngoài ra, kích thước biến tử của đầu dò cũng được lựa chọn dựa trên loại vật liệu kiểm tra. Đầu dò có kích thước biến tử lớn hơn cho xung có năng lượng lớn và phù hợp với các đường truyền âm dài, tuy nhiên đầu dò có kích thước nhỏ lại cho góc mở lớn hơn để kiểm tra được phạm vi rộng hơn.

Đầu dò TOFD thường là đầu dò có độ dập xung cao, phát sóng dọc với độ phân giải tốt. Các đầu dò này sử dụng biến tử độ nhay cao, băng thông rộng với tần số từ 2.25 MHz tới 15 MHz và đường kính biến tử từ 3 mm (0.25″) tới 12 mm (0.50″). Các đầu dò này cũng được sử dụng với nêm TOFD thiết kế để tạo sóng dọc trong thép.

Chiều dày (t) mm	Số kênh TOFD	Dải chiều dày	Đầu dò	Góc phát (độ)	Tần số (MHz)	Biến tử (mm)	Nêm
6-10	1	0~t	C563-SM	70	10	3	ST1 **
10-15	1	0~t	C563-SM	70	10	3	ST1 **
15-35	1	0~t	C544-SM	60, 70	10	6	ST1
35-50	1	0~t	C543-SM	60, 70	5	6	ST1
50-100	2	0~t/2	C543-SM	60, 70	5	6	ST1
50-100	2	t/2~t	C568-SM	45, 60	5	10	ST2
100-200	3	0~t/3	C543-SM	60, 70	5	6	ST1
		t/3~ 2t/3	C568-SM	45, 60	5	10	ST2
		2t/3-t	C541-SM	45, 60	5	13	ST2
200-300	4	0~t/4	C543-SM	60,70	5	6	ST1
		t/4~ 2t/4	C568-SM	45, 60	5	10	ST2
		2t/4~ 3t/4	C566-SM	45, 60	2.25	10	ST2
		3t/4~ t	C540-SM	45	2.25	13	ST2

* Đầu dò V-564 sử dụng biến tử piezo-ceramic tiêu chuẩn (không phải biến tử composite).
** đầu dò kích thước biến tử 0.125 in. (3 mm) cũng sẽ phù hợp với nêm ST1-XXX-Cobra. Các đầu dò thuộc bảng trên có thể sử dụng kết nối LEMO 00 (-SL) hay kết nối Microdot (-SM).

Lựa chọn nêm và góc nêm khi kiểm tra TOFD

Nêm bọc thép với X-Value ngắn IHS hay Nêm nhựa IHC thông thường

Thay thế cho các nêm chế tạo hoàn toàn bằng Rexolite, bộ nêm TOFD bọc thép không gỉ tăng độ bền, độ chịu mài mòn và mang lại giá trị X-Value ngắn, giúp đặt đầu dò sát chân mối hàn.

Chịu mài mòn tốt và tiếp âm tốt hơn do không cần chân carbide.
X-Value ngắn (3 mm) cho phép kiểm tra các vị trí gần bề mặt hơn. Có thêm phiên bản “short” cho giá trị X-Value ngắn nhất có thể.
Độ bền cao.

Nêm TOFD vỏ thép IHS và nêm IHC tương ứng

Danh mục nêm ToFD tương thích với các đầu dò ren vặn

Danh sách nêm ToFD

Mã U8	品番	説明
U8710001	ST1-45L	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 45 degree longitudinal wave, without IHC option (whitout irrigation holes and carbides),
U8710002	ST1-45L-IHC	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides)
U8710013	ST1-45L-IHC-AOD12	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710014	ST1-45L-IHC-AOD16	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 9.84 in. (250 mm) to 16 in. (406 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710015	ST1-45L-IHC-AOD2	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 1.75 in. (44 mm) to 2 in. (50.8 mm) outside diameter (OD) pipe for inspection of circumferential welds.?
U8710016	ST1-45L-IHC-AOD2.25	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2 in. (50.8 mm) to 2.25 in. (57.15 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710017	ST1-45L-IHC-AOD2.5	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.2 in. (55 mm) to 2.5 in. (63.5 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710018	ST1-45L-IHC-AOD22	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710019	ST1-45L-IHC-AOD3	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.5 in. (63.5 mm) to 3 in. (76.2 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710020	ST1-45L-IHC-AOD3.5	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.9 in. (73 mm) to 3.5 in. (88.9 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710021	ST1-45L-IHC-AOD4	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.2 in. (82 mm) to 4 in. (101.6 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710022	ST1-45L-IHC-AOD6	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 4.5 in. (114 mm) to 6 in. (152.4 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710023	ST1-45L-IHC-AOD8	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 5.5 in. (140 mm) to 8 inches (203.2 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710024	ST1-50L-IHC	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).
U8710025	ST1-55L-IHC	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).
U8710004	ST1-60L-IHC	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides).??
U8710026	ST1-60L-IHC-AOD12	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710027	ST1-60L-IHC-AOD16	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 12 inches (305mm) to 16 inches (406mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710028	ST1-60L-IHC-AOD2	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 1.75 in. (44 mm) to 2 in. (50.8 mm) outside diameter (OD) pipe for inspection of circumferential wel
U8710029	ST1-60L-IHC-AOD2.25	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2 in. (50.8 mm) to 2.25 in. (57.15 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710030	ST1-60L-IHC-AOD2.5	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.2 in. (55 mm) to 2.5 in. (63.5 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710031	ST1-60L-IHC-AOD22	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710032	ST1-60L-IHC-AOD3	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.5 in. (63.5 mm) to 3 in. (76.2 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710033	ST1-60L-IHC-AOD3.5	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.9 in. (73 mm) to 3.5 in. (88.9 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710034	ST1-60L-IHC-AOD4	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.2 in. (82 mm) to 4 in. (101.6 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710035	ST1-60L-IHC-AOD6	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 4.5 in. (114 mm) to 6 in. (152.4 mm) outside diameter (OD) pipe for inspection of circumferential welds.?
U8710036	ST1-60L-IHC-AOD8	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 5.5 in. (140 mm) to 8 in. (203.2 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710006	ST1-70L-IHC	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides).
U8710037	ST1-70L-IHC-AOD12	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710038	ST1-70L-IHC-AOD16	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 12 inches (305mm) to 16 inches (406mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710039	ST1-70L-IHC-AOD2	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 1.75 in. (44 mm) to 2 in. (50.8 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710040	ST1-70L-IHC-AOD2.25	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2 in. (50.8 mm) to 2.25 in. (57.15 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710041	ST1-70L-IHC-AOD2.5	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.2 in. (55 mm) to 2.5 in. (63.5 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710042	ST1-70L-IHC-AOD22	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710043	ST1-70L-IHC-AOD3	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.5 in.(63.5 mm) to 3 in. (76.2 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710044	ST1-70L-IHC-AOD3.5	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.9 in. (73 mm) to 3.5 in. (88.9 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710045	ST1-70L-IHC-AOD4	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.2 in. (82 mm) to 4 in. (101.6 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710046	ST1-70L-IHC-AOD6	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 4.5 in. (114 mm) to 6 in. (152.4 mm) outside diameter (OD) pipe for inspection of circumferential welds.??
U8710047	ST1-70L-IHC-AOD8	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 5.5 in. (140 mm) to 8 in. (203.2 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710083	ST2-30L-IHC	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides),
U8710008	ST2-45L-IHC	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 - 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (with irrigation holes and carbides)
U8710048	ST2-45L-IHC-AOD12	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710049	ST2-45L-IHC-AOD16	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching12 inches (305mm) to 16 inches (406mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710050	ST2-45L-IHC-AOD2	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 1.75 inches (44mm) to 2 inches (50.8mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710051	ST2-45L-IHC-AOD2.25	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2 inches (50.8mm) to 2.25 inches (57.15mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710052	ST2-45L-IHC-AOD2.5	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.2 inches (55mm) to 2.5 inches (63.5mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710053	ST2-45L-IHC-AOD22	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710054	ST2-45L-IHC-AOD3	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.5 inches (63.5mm) to 3 inches (76.2mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710055	ST2-45L-IHC-AOD3.5	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.9 inches (73mm) to 3.5 inches (88.9mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710056	ST2-45L-IHC-AOD4	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.2 inches (82mm) to 4 inches (101.6mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710057	ST2-45L-IHC-AOD6	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 4.5 inches (114mm) to 6 inches (152.4mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710058	ST2-45L-IHC-AOD8	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 5.5 inches (140mm) to 8 inches (203.2mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710059	ST2-50L-IHC	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).
U8710010	ST2-60L-IHC	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 - 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (whit irrigation holes and carbides).
U8710060	ST2-60L-IHC-AOD12	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710061	ST2-60L-IHC-AOD16	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 12 inches (305mm) to 16 inches (406mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710062	ST2-60L-IHC-AOD2	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 1.75 inches (44mm) to 2 inches (50.8mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710063	ST2-60L-IHC-AOD2.25	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2 inches (50.8mm) to 2.25 inches (57.15mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710064	ST2-60L-IHC-AOD2.5	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.2 inches (55mm) to 2.5 inches (63.5mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710065	ST2-60L-IHC-AOD22	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710066	ST2-60L-IHC-AOD3	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.5 inches (63.5mm) to 3 inches (76.2mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710067	ST2-60L-IHC-AOD3.5	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.9 inches (73mm) to 3.5 inches (88.9mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710068	ST2-60L-IHC-AOD4	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.2 inches (82mm) to 4 inches (101.6mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710069	ST2-60L-IHC-AOD6	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 4.5 inches (114mm) to 6 inches (152.4mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710070	ST2-60L-IHC-AOD8	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 5.5 inches (140mm) to 8 inches (203.2mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710012	ST2-70L-IHC	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave with IHC option (irrigation holes and carbides).
U8710071	ST2-70L-IHC-AOD12	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710072	ST2-70L-IHC-AOD16	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 12 inches (305mm) to 16 inches (406mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710073	ST2-70L-IHC-AOD2	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 1.75 inches (44mm) to 2 inches (50.8mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710074	ST2-70L-IHC-AOD2.25	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2 inches (50.8mm) to 2.25 inches (57.15mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710075	ST2-70L-IHC-AOD2.5	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.2 inches (55mm) to 2.5 inches (63.5mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710076	ST2-70L-IHC-AOD22	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710077	ST2-70L-IHC-AOD3	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.5 inches (63.5mm) to 3 inches (76.2mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710078	ST2-70L-IHC-AOD3.5	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.9 inches (73mm) to 3.5 inches (88.9mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710079	ST2-70L-IHC-AOD4	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.2 inches (82mm) to 4 inches (101.6mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710080	ST2-70L-IHC-AOD6	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 4.5 inches (114mm) to 6 inches (152.4mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710081	ST2-70L-IHC-AOD8	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 5.5 inches (140mm) to 8 inches (203.2mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710086	ST1-0L-IHC	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 0 degree longitudinal wave, with IHC option (irrigation holes and carbides).
U8710087	ST1-60L-IHC-AOD10	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching a 10-inch outside diameter (OD) pipe for inspection of circumferential welds.
U8710088	ST1-60L-IHC-AOD30	Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching a 30-inch outside diameter (OD) pipe for inspection of circumferential welds.
U8710003	ST1-60L	TOFD wedge for .25 in. (0.25 in.) txdr, 60 degree , NO IHC
U8720701	ST2-0L-IHC	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 0 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge has a 15.9 mm delay line.
U8720887	ST1-60L-IHC-AID22	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 22 inches (558.8 mm) Axial Inside Diameter (AID) Pipe for inspection of Circomferential Welds.
U8700507	ST1-65L-IHC	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 65 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).
U8700520	ST1-45L-IHC-AOD5	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.8 in. (98 mm) to 5 in. (127 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700521	ST1-50L-IHC-AOD12	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700522	ST1-50L-IHC-AOD16	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 12 inches (305mm) to 16 inches (406mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700523	ST1-50L-IHC-AOD2	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 1,75 inches (44mm) to 2 inches (50,8mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700524	ST1-50L-IHC-AOD2.25	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 2 inches (50,8mm) to 2,25 inches (57,15mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700525	ST1-50L-IHC-AOD2.5	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 2,2 inches (55mm) to 2,5 inches (63,5mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700526	ST1-50L-IHC-AOD22	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700527	ST1-50L-IHC-AOD3	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 2,5 inches (63,5mm) to 3 inches (76,2mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700528	ST1-50L-IHC-AOD3.5	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 2,9 inches (73mm) to 3,5 inches (88,9mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700529	ST1-50L-IHC-AOD4	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 3,2 inches (82mm) to 4 inches (101,6mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700530	ST1-50L-IHC-AOD5	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 3,8 inches (98mm) to 5 inches (127 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700531	ST1-50L-IHC-AOD6	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 4,5 inches (114mm) to 6 inches (152,4mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700532	ST1-50L-IHC-AOD8	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 50 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 5,5inches (140mm) to 8 inches (203,2mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700533	ST1-55L-IHC-AOD12	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700534	ST1-55L-IHC-AOD16	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching12 inches (305mm) to 16 inches (406mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700535	ST1-55L-IHC-AOD2	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 1,75 inches (44mm) to 2 inches (50,8mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700536	ST1-55L-IHC-AOD2.25	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 2 inches (50.8mm) to 2,25 inches (57,15mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700537	ST1-55L-IHC-AOD2.5	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 2,2 inches (55mm) to 2,5 inches (63,5mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700538	ST1-55L-IHC-AOD22	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700539	ST1-55L-IHC-AOD3	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 2,5 inches (63,5mm) to 3 inches (76,2mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700540	ST1-55L-IHC-AOD3.5	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 2,9 inches (73mm) to 3.5 inches (88,9mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700541	ST1-55L-IHC-AOD4	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 3,2 inches (82mm) to 4 inches (101,6mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700542	ST1-55L-IHC-AOD5	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 3,8 inches (98mm) to 5 inches (127mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700543	ST1-55L-IHC-AOD6	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 4,5 inches (114mm) to 6 inches (152,4mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700544	ST1-55L-IHC-AOD8	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 55 degree longitudinal wave, with IHC option (irrigation holes and carbides).The wedge features a curvature matching 5,5 inches (140mm) to 8 inches (203,2mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700545	ST1-70L-IHC-AOD5	Wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.8 in. (98 mm) to 5 in. (127 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700546	ST2-45L-IHC-AOD5	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.8 inches (98mm) to 5 inches (127mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700547	ST2-50L-IHC-AOD12	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700548	ST2-50L-IHC-AOD16	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 12 inches (305mm) to 16 inches (406mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700549	ST2-50L-IHC-AOD2	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 1.75 inches (44mm) to 2 inches (50.8mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700550	ST2-50L-IHC-AOD2.25	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 2 inches (50.8mm) to 2.25 inches (57.15mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700551	ST2-50L-IHC-AOD2.5	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 2.2 inches (55mm) to 2.5 inches (63.5mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700552	ST2-50L-IHC-AOD22	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700553	ST2-50L-IHC-AOD3	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 2.5 inches (63.5mm) to 3 inches (76.2mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700554	ST2-50L-IHC-AOD3.5	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 2.9 inches (73mm) to 3.5 inches (88.9mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700555	ST2-50L-IHC-AOD4	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 3.2 inches (82mm) to 4 inches (101.6mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700556	ST2-50L-IHC-AOD5	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 3.8 inches (98mm) to 5 inches (127mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700557	ST2-50L-IHC-AOD6	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 4.5 inches (114mm) to 6 inches (152.4mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700558	ST2-50L-IHC-AOD8	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 5.5 inches (140mm) to 8 inches (203.2mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700559	ST2-60L-IHC-AOD5	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.8 inches (98mm) to 5 inches (127mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700560	ST2-70L-IHC-AOD5	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.8 inches (98mm) to 5 inches (127mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700590	ST1-60L-IHC-AOD5	Wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 60 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.8 in. (98 mm) to 5 in. (127 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710005	ST1-70L	Plain 70° TOFD Wedge 6 mm (0.25 in.) MAB
U8710214	ST1C-70L-IHS-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame)
U8710091	ST2-30L-IHC-AOD2	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 1.75 inches (44mm) to 2 inches (50.8mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710092	ST2-30L-IHC-AOD2.25	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2 inches (50.8mm) to 2.25 inches (57.15mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710093	ST2-30L-IHC-AOD2.5	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.2 inches (55mm) to 2.5 inches (63.5mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710094	ST2-30L-IHC-AOD3	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.5 inches (63.5mm) to 3 inches (76.2mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710095	ST2-30L-IHC-AOD3.5	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 2.9 inches (73mm) to 3.5 inches (88.9mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710096	ST2-30L-IHC-AOD4	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.2 inches (82mm) to 4 inches (101.6mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710097	ST2-30L-IHC-AOD5	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 3.8 in. (98 mm) to 5 in. (127 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710098	ST2-30L-IHC-AOD6	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 4.5 in. (114 mm) to 6 in. (152.4 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710099	ST2-30L-IHC-AOD8	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 5.5 inches (131.75mm) to 8 inches (203.2mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710100	ST2-30L-IHC-AOD12	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710101	ST2-30L-IHC-AOD16	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 12 inches (305mm) to 16 inches (406mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710102	ST2-30L-IHC-AOD22	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 30 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 16 inches (406mm) to 22 inches (558mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710009	ST2-60L	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 - 12.5mm element diameter, 60 degree longitudinal wave, without IHC option (whitout irrigation holes and carbides),
U8710007	ST2-45L	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 - 12.5mm element diameter, 45 degree longitudinal wave, without IHC option (without irrigation holes and carbides)
U8710011	ST2-70L	Wedge for Conventional TOFD uT probe, Panametrics type, 9.5 - 12.5mm element diameter, 70 degree longitudinal wave, without IHC option (whitout irrigation holes and carbides),
U8721251	ST2-55L-IHC	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 55 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).
U8700886	ST1-52L-IHC	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 52 degree Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides).
U8700887	ST1-52L-IHC-AOD8	Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter 52 degree longitudinal wave with IHC option (irrigation holes and carbides).The wedge features a curvature matching 5.5 inches (131.75mm) to 8 inches (203.2 mm) outside diameter (OD) pipe for inspection of circumferential welds.??
U8700888	ST1-52L-IHC-AOD12	Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter 52 degree longitudinal wave with IHC option (irrigation holes and carbides).The wedge features a curvature matching 10 inches (254mm) to 12 inches (304.8mm) outside diameter (OD) pipe for inspection of circumferential welds.?
U8700889	ST1-52L-IHC-AOD7	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 52 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 7 inches (177.8 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds.
U8700890	ST1-45L-IHC-AOD7	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 7 inches (177.8 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds.
U8700891	ST1-60L-IHC-AOD7	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 7 inches (177.8 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds.
U8700892	ST1-70L-IHC-AOD7	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 7 inches (177.8 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds.
U8700893	ST1-52L-IHC-AOD10	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 52 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10 inches (254 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds.
U8700894	ST1-45L-IHC-AOD10	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10 inches (254 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds.
U8700895	ST1-70L-IHC-AOD10	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10 inches (254 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds.
U8700905	ST2-60L-IHC-COD18	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides in rexolite, no ring). The wedge features a curvature matching 18 inches (457.2 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
U8700906	ST2-60L-IHC-COD20	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides in rexolite, no ring). The wedge features a curvature matching 20 inches (508 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
U8700910	ST2-45L-IHC-COD18	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides in rexolite, no ring). The wedge features a curvature matching 18 inches (457.2 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
U8700911	ST2-45L-IHC-COD20	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides in rexolite, no ring). The wedge features a curvature matching 20 inches (508 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
U8721569	ST1-70L-IHC-AOD18	Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter 70 degree longitudinal wave with IHC option (irrigation holes and carbides).The wedge features a curvature matching 18 inches (457mm) outside diameter (OD) pipe for inspection of circumferential welds.??
U8700985	ST1-45L-IHC-AOD30	Standard wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 45 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 22 in. (558 mm) to 30 in. (762 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8700986	ST1-70L-IHC-AOD30	Standard wedge for Conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides). The wedge features a curvature matching 22 in. (558 mm) to 30 in. (762 mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710117	ST1-70L-IHC-AOD24	Custom wedge for conventional TOFD uT probe, Panametrics type, 3 mm or 6 mm element diameter, 70 degree longitudinal wave, with IHC option (irrigation holes and carbides), The wedge features a curvature matching 24 (609.6mm) outside diameter (OD) pipe for inspection of circumferential welds.
U8710122	ST1-60L-HDPE-WHC	Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 60 degree longitudinal wave in High Density Polyethylene (HDPE), with WHC option (Water column, holes and carbides).
U8710123	ST2-60L-HDPE-WHC	Custom wedge for conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 60 degree degree longitudinal wave in High Density Polyethylene (HDPE), with WHC option (Water column, holes and carbides).
U8710124	ST2-70L-HDPE-WHC	Custom wedge for conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 70 degree degree longitudinal wave in High Density Polyethylene (HDPE), with WHC option (Water column, holes and carbides).
U8710125	ST1-45L-HDPE-WHC	Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 45 degree longitudinal wave in High Density Polyethylene (HDPE), with WHC option (Water column, holes and carbides).
U8710126	ST2-45L-HDPE-WHC	Custom wedge for conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 45 degree longitudinal wave in High Density Polyethylene (HDPE), with WHC option (Water column, holes and carbides).
U8701035	ST2-65L-IHC	Standard wedge for conventional TOFD uT probe, Panametrics type, 9.5 or 12.5mm element diameter, 65 degree longitudinal wave, with IHC option (Irrigation, holes and carbides).
U8721845	ST1-70L-HDPE-WHC	Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 70 degree longitudinal wave in High Density Polyethylene (HDPE), with WHC option (Water column, holes and carbides).
U8710127	ST1-60L-AOD1	Custom wedge for conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 60 degree longitudinal wave, without IHC option (Irrigation, holes and carbides). The wedge features a curvature matching 1 inches (25.4mm) outside diameter (OD) pipe for inspection of circomferencial welds.
U8710128	ST1-75L-IHC	Custom Wedge for Conventional TOFD uT Probe, Panametrics type, 3 or 6mm element diameter, 75 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).
U8721863	ST1-60L-IHC-AOD18	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 18 inches (457.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds.
U8721864	ST1-45L-IHC-AOD18	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 18 inches (457.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds.
U8721904	ST1-70L-IHC-AOD14	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds.
U8710129	ST1-70L-IHC-AOD20	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circomferencial Welds.
U8701158	ST1-55L	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 55 degree Refracted Angle in Steel, Longitudinal Wave, without IHCwithout IHC Option (Irrigation, Holes and Carbides).
U8701159	ST2-55L	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 55 degree Refracted Angle in Steel, Longitudinal Wave, without IHCwithout IHC Option (Irrigation, Holes and Carbides).
U8710130	ST1-70L-IHC-AOD6.625	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6.625 inches (168.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8701308	ST1-52L-IHC-AOD16	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 52 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching from 12 inches (304.8 mm) to 16 inches (406.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8701309	ST1-52L-IHC-AOD6	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 52 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching from 5 inches (127 mm) to 6 inches (152.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8701310	ST1-52L-IHC-AOD4	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 52 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching from 3.5 inches (88.9 mm) to 4 inches (101.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8701311	ST1-52L-IHC-AOD3	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 52 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching from 2.5 inches (63.5 mm) to 3 inches (76.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8701348	COBRA-A-ST1-70L	ST1 wedge kit for Cobra scanner. KIT includes: one pair of flat wedges plus 9 pairs of curved wedges to cover from 1.05in to 4.5in OD pipes. To fit ST1 probes with 3mm diameter elements. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701357	ST1-70L-IHC-AOD36	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 36 inches (914.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710131	ST1-60L-IHC-AOD36	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 36 inches (914.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710132	ST1-60L-IHC-AOD24	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 24 inches (609.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710133	ST1-60L-IHC-AOD20	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710134	ST1-60L-IHC-AOD14	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710135	ST1-50L-IHC-AOD36	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 36 inches (914.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710136	ST1-50L-IHC-AOD20	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710137	ST1-45L-IHC-AOD36	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 36 inches (914.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710138	ST1-45L-IHC-AOD24	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 24 inches (609.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710139	ST1-45L-IHC-AOD20	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710140	ST1-45L-IHC-AOD14	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8701360	ST1-70L-IH-AOD2.875-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 2.375 in. (60.33 mm) to 2.875 in. (73.03 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701361	ST1-70L-IH-AOD3.5-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 2.875 in. (73.0 3 mm) to 3.5 in. (88.9 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701362	ST1-70L-IH-AOD4-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 3.5 in. (88.9 mm) to 4 in. (101.6 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701363	ST1-70L-IH-AOD4.5-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 4 in. (101.6 mm) to 4.5 in. (114.3 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701364	ST1-70L-IH-AOD0.84-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 0.84 in. (21.34 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701365	ST1-70L-IH-AOD1.05-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 0.84 in. (21.34 mm) to 1.05 in. (26.67 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701366	ST1-70L-IH-AOD1.315-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.05 in. (26.67 mm) to 1.315 in. (33.4 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701367	ST1-70L-IH-AOD1.66-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.315 in. (33.4 mm) to 1.66 in. (42.16 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701368	ST1-70L-IH-AOD1.9-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.66 in. (42.16 mm) to 1.9 inches (48.26 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701369	ST1-70L-IH-AOD2.375-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.9 in. (48.26 mm) to 2.375 in. (60.33 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8722259	ST1-60L-IHC-AOD9.96	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 9.96 inches (253 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8722260	ST1-60L-IHC-AOD9.63	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 9.63 inches (244.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8722264	ST1-70L-IH-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides).
U8710142	ST1-45L-IHS-AOD4.5	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 4 inches (101.6 mm) to 4.5 inches (114.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710143	ST1-45L-IHS-AOD5.563	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 4.5 inches (114.3 mm) to 5.563 inches (141.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710144	ST1-45L-IHS-AOD6.625	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 5.563 inches (141.3 mm) to 6.625 inches (168.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710145	ST1-45L-IHS-AOD8.625	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 6.625 inches (168.3 mm) to 8.625 inches (219.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710146	ST1-45L-IHS-AOD10.75	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 8.625 inches (219.1 mm) to 10.75 inches (273.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710147	ST1-45L-IHS-AOD12.75	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 10.75 inches (273.1 mm) to 12.75 inches (323.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710148	ST1-45L-IHS-AOD16	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 12.75 inches (323.9 mm) to 16 inches (406.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710149	ST1-45L-IHS-AOD20	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 16 inches (406.4 mm) to 20 inches (508 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710150	ST1-45L-IHS-AOD24	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 20 inches (508 mm) to 24 inches (610 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710152	ST1-60L-IHS-AOD4.5	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 4 inches (101.6 mm) to 4.5 inches (114.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710153	ST1-60L-IHS-AOD5.563	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 4.5 inches (114.3 mm) to 5.563 inches (141.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710154	ST1-60L-IHS-AOD6.625	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 5.563 inches (141.3 mm) to 6.625 inches (168.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710155	ST1-60L-IHS-AOD8.625	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 6.625 inches (168.3 mm) to 8.625 inches (219.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710156	ST1-60L-IHS-AOD10.75	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 8.625 inches (219.1 mm) to 10.75 inches (273.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710157	ST1-60L-IHS-AOD12.75	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 10.75 inches (273.1 mm) to 12.75 inches (323.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710158	ST1-60L-IHS-AOD16	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 12.75 inches (323.9 mm) to 16 inches (406.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710159	ST1-60L-IHS-AOD20	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 16 inches (406.4 mm) to 20 inches (508 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710160	ST1-60L-IHS-AOD24	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 20 inches (508 mm) to 24 inches (610 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710162	ST1-70L-IHS-AOD4.5	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 4 inches (101.6 mm) to 4.5 inches (114.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710163	ST1-70L-IHS-AOD5.563	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 4.5 inches (114.3 mm) to 5.563 inches (141.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710164	ST1-70L-IHS-AOD6.625	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 5.563 inches (141.3 mm) to 6.625 inches (168.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710165	ST1-70L-IHS-AOD8.625	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 6.625 inches (168.3 mm) to 8.625 inches (219.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710166	ST1-70L-IHS-AOD10.75	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 8.625 inches (219.1 mm) to 10.75 inches (273.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710167	ST1-70L-IHS-AOD12.75	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 10.75 inches (273.1 mm) to 12.75 inches (323.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710168	ST1-70L-IHS-AOD16	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 12.75 inches (323.9 mm) to 16 inches (406.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710169	ST1-70L-IHS-AOD20	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 16 inches (406.4 mm) to 20 inches (508 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710170	ST1-70L-IHS-AOD24	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 20 inches (508 mm) to 24 inches (610 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710141	ST1-45L-IHS	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame).
U8710151	ST1-60L-IHS	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame).
U8710161	ST1-70L-IHS	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame).
U8722283	ST1-70L-CUNI-IHC	ETO0049: Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Copper Nickel alloy, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).
U8722284	ST1-60L-CUNI-IHC	ETO0049: Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Copper Nickel alloy, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).
U8710171	ST2-15L-IHC	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 15 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).
U8710172	COBRA-A-ST1-80L	ST1 -80L wedge kit for Cobra scanner. KIT includes: one pair of flat wedges plus 9 pairs of curved wedges to cover from 1.05in to 4.5in OD pipes. To fit ST1 probes with 3mm diameter elements. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701413	ST1-80L-IH-AOD1.05-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 0.84 in. (21.34 mm) to 1.05 in. (26.67 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701414	ST1-80L-IH-AOD1.315-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.05 in. (26.67 mm) to 1.315 in. (33.4 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701415	ST1-80L-IH-AOD1.66-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.315 in. (33.4 mm) to 1.66 in. (42.16 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701416	ST1-80L-IH-AOD1.9-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.66 in. (42.16 mm) to 1.9 inches (48.26 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701417	ST1-80L-IH-AOD2.375-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.9 in. (48.26 mm) to 2.375 in. (60.33 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701418	ST1-80L-IH-AOD2.875-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 2.375 in. (60.33 mm) to 2.875 in. (73.03 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701419	ST1-80L-IH-AOD3.5-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 2.875 in. (73.0 3 mm) to 3.5 in. (88.9 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701420	ST1-80L-IH-AOD4-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 3.5 in. (88.9 mm) to 4 in. (101.6 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701421	ST1-80L-IH-AOD4.5-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 4 in. (101.6 mm) to 4.5 in. (114.3 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
U8701422	ST1-80L-IH-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides).
U8710173	ST1-50L-IHS	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame).
U8710174	ST1-50L-IHS-AOD4.5	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 4 inches (101.6 mm) to 4.5 inches (114.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710175	ST1-50L-IHS-AOD5.563	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 4.5 inches (114.3 mm) to 5.563 inches (141.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710176	ST1-50L-IHS-AOD6.625	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 5.563 inches (141.3 mm) to 6.625 inches (168.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710177	ST1-50L-IHS-AOD8.625	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 6.625 inches (168.3 mm) to 8.625 inches (219.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710178	ST1-50L-IHS-AOD10.75	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 8.625 inches (219.1 mm) to 10.75 inches (273.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710179	ST1-50L-IHS-AOD12.75	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 10.75 inches (273.1 mm) to 12.75 inches (323.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710180	ST1-50L-IHS-AOD16	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 12.75 inches (323.9 mm) to 16 inches (406.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710181	ST1-50L-IHS-AOD20	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 16 inches (406.4 mm) to 20 inches (508 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710182	ST1-50L-IHS-AOD24	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 20 inches (508 mm) to 24 inches (610 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8701446	ST2-30L-IHC-COD22	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 30 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 22 inches (558.8 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
U8701454	ST1-70L-IHS-AOD3	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2.5 inches (63.5 mm) to 3 inches (76.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8701457	ST1-65L-IHC-AOD12	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 65 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching from 8 inches (203.2 mm) to 12 inches (304.8 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8701458	ST1-65L-IHC-AOD8	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 65 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching from 6 inches (152.4 mm) to 8 inches (203.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8701459	ST1-65L-IHC-AOD6	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 65 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching from 5 inches (127 mm) to 6 inches (152.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710183	ST1-70L-IHC-AOD26	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 26 inches (660.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710184	ST1-60L-IHC-AOD26	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 26 inches (660.4 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8701505	ST1-70L-IHC-AOD12.75	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 12.75 inches (323.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8701506	ST1-70L-IHC-AOD10.75	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 10.75 inches (273.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8701507	ST1-70L-IHC-AOD8.625	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 8.625 inches (219.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8701508	ST1-70L-IHC-AOD4.5	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 4.5 inches (114.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8701509	ST1-60L-IHC-AOD12.75	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 12.75 inches (323.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8701510	ST1-60L-IHC-AOD10.75	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 10.75 inches (273.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8701511	ST1-60L-IHC-AOD8.625	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 8.625 inches (219.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8701512	ST1-60L-IHC-AOD6.625	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 6.625 inches (168.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8722526	ST1-30L-IHC	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 30 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).?
U8722527	ST1-70L-IHC-AOD28	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 28 inches (711.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8722528	ST1-60L-IHC-AOD28	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 28 inches (711.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710186	ST1-60L-COD6	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 6 inches (152.4 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
U8710187	ST1-60L-COD8	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 8 inches (203.2 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
U8710188	ST1-60L-COD10	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 10 inches (254 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
U8710189	ST1-60L-COD12	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 12 inches (304.8 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
U8710190	ST1-60L-COD14	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 14 inches (355.6 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
U8710191	ST1-60L-COD16	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 16 inches (406.4 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
U8710192	ST1-60L-COD20	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides).??? The wedge features a curvature matching 20 inches (508 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
U8710195	ST1-60L-IHC-AOD4.5	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 4.5 inches (114.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710197	ST1-70L-IHS-COD113MM	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 113 mm (4.449 inches) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_
U8710198	ST1-70L-IHS-COD132MM	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 132 mm (5.197 inches) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_
U8710199	ST1-60L-IHC-AID19.25	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 19.25 inches (489 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds.
U8710200	ST1-60L-IHS-COD132MM	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 132 mm (5.197 inches) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
U8710201	ST1-60L-IHS-COD113MM	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 113 mm (4.449 inches) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_
U8710204	ST1-45L-IHC-AOD12.75	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12.75 inches (323.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8710205	ST1-45L-IHC-AOD10.75	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10.75 inches (273.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8710206	ST1-45L-IHC-AOD8.625	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 8.625 inches (219.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8722789	ST1-55L-IHC-AOD10	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 9.96 inches (253 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8710213	ST1C-60L-IHS-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). _x000D_
U8710216	ST1-70L-AID3	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, without IHC Option Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 3 inches (76.2 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_
U8710217	ST1-60L-AID3	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 3 inches (76.2 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_
U8710218	ST1-45L-AID3	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 3 inches (76.2 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_
U8701651	ST1-55L-IHC-AOD8.625	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 55° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 8.625 inches (219.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
U8701657	ST1-80L-IHC	Standard Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 80° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). _x000D_
U8701660	ST1C-60L-IHS-AOD6.625-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 6.625in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701661	ST1C-60L-IHS-AOD8.625-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 8.625in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701662	ST1C-60L-IHS-AOD10.75-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 10.75in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701663	ST1C-60L-IHS-AOD12.75-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 12.75in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701664	ST1C-60L-IHS-AOD14-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 14in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701665	ST1C-60L-IHS-AOD16-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 16in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701666	ST1C-60L-IHS-AOD18-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 18in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701667	ST1C-60L-IHS-AOD20-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 20in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701668	ST1C-70L-IHS-AOD6.625-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 6.625in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701669	ST1C-70L-IHS-AOD8.625-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 8.625in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701670	ST1C-70L-IHS-AOD10.75-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 10.75in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701671	ST1C-70L-IHS-AOD12.75-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 12.75in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701672	ST1C-70L-IHS-AOD14-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 14in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701673	ST1C-70L-IHS-AOD16-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 16in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701674	ST1C-70L-IHS-AOD18-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 18in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701675	ST1C-70L-IHS-AOD20-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 20in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701676	ST1C-45L-IHS-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). _x000D_
U8701677	ST1C-45L-IHS-AOD6.625-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 6.625in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701678	ST1C-45L-IHS-AOD8.625-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 8.625in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701679	ST1C-45L-IHS-AOD10.75-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 10.75in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701680	ST1C-45L-IHS-AOD12.75-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 12.75in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701681	ST1C-45L-IHS-AOD14-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 14in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701682	ST1C-45L-IHS-AOD16-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 16in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701683	ST1C-45L-IHS-AOD18-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 18in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
U8701684	ST1C-45L-IHS-AOD20-Short	Custom shorter design Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 20in Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
Q7000001	ST1-60L-IH-AOD1.66-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.315 in. (33.4 mm) to 1.66 in. (42.16 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. _x000D_
Q7000002	ST1-60L-IH-AOD1.9-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.66 in. (42.16 mm) to 1.9 inches (48.26 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. _x000D_
Q7000003	ST1-60L-IH-AOD2.375-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.9 in. (48.26 mm) to 2.375 inches (60.33 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. _x000D_
Q7000004	ST1-60L-IH-AOD2.875-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 2.375 in. (60.33 mm) to 2.875 inches (73.03 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner. _x000D_
Q7200084	ST1-65L-IHS	Standard Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 65 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). _x000D_
Q7100001	ST1-60L-IHS-AOD14	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 14 inches (355.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
Q7200146	ST1-20L-IHC	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 20° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).
Q7200147	ST1-25L-IHC	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 20° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).
Q7200148	ST2-20L-IHC	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 20° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).
Q7200149	ST2-25L-IHC	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 25° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).
Q7200265	ST1-70L-IHC-COD16	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 16 inches (406.4 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7200267	ST1-65L-IHS-COD8	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides in rexolite, no ring). The wedge features a curvature matching 18 inches (457.2 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7200281	ST1-60L-IHC-COD8	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 8 inches (203.2 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7000079	ST1-60L-IHC-COD8.625	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 8.625 inches (219.1 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_
Q7000080	ST1-70L-IHC-COD8.625	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 8.625 inches (219.1 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_
Q7000081	ST1-70L-COD12.75	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12.75 inches (323.9 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7000084	ST1-80L-IHC-COD12	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 80° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12 inches (304.8 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_
Q7000085	ST1-75L-IHC-AOD8	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 75° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching from 6 inches (152.4 mm) to 8 inches (203.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7000086	ST1-70L-IHC-COD12	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12 inches (304.8 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7200403	ST1-65L	Standard Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 65° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides).
Q7200431	ST1-60L-IHS-AOD2.5	Custom wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 2.5 inches (63.5 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7200432	ST1-60L-IHS-AOD3.5	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2.875 inches (73 mm) to 3.5 inches (88.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7200433	ST1-60L-IHS-AOD30	Custom wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 30 inches (772 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7200434	ST1-70L-IHS-AOD2.5	Custom wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 2.5 inches (63.5 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7200435	ST1-70L-IHS-AOD3.5	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2.875 inches (73 mm) to 3.5 inches (88.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7200436	ST1-70L-IHS-AOD30	Custom wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching 30 inches (772 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7100003	ST1-70L-CUNI-IH-AOD3.5-COBRA	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in CuNi, Longitudinal Wave, with IH Option (Irrigation and Holes). The wedge features a curvature matching 3.5in Axial Outside Diamater for Inspection of Circumferential Welds. Suitable for the Cobra scanner with reduced clearance due to TOFD probes. _x000D_
Q7100004	ST1-45L-IHC-AID12	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12 inches (304.8 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds.
Q7100005	ST1-60L-IHC-AID12	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12 inches (304.8 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds.
Q7100006	ST1-70L-IHC-AID12	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12 inches (304.8 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds.
Q7100007	ST1-45L-IHC-AID20	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds.
Q7100008	ST1-60L-IHC-AID20	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds.
Q7100009	ST1-70L-IHC-AID20	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds.
Q7200491	ST1-45L-IHS-AOD2.375	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2 inches (50.8 mm) to 2.375 inches (60.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7200492	ST1-45L-IHS-AOD2.875	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2.375 inches (60.3 mm) to 2.875 inches (73 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7200493	ST1-45L-IHS-AOD3.5	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2.875 inches (73 mm) to 3.5 inches (88.9 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7200494	ST1-60L-IHS-AOD2.375	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2 inches (50.8 mm) to 2.375 inches (60.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7200495	ST1-60L-IHS-AOD2.875	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2.375 inches (60.3 mm) to 2.875 inches (73 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7200496	ST1-70L-IHS-AOD2.375	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2 inches (50.8 mm) to 2.375 inches (60.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7200497	ST1-70L-IHS-AOD2.875	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame). The wedge features a curvature matching from 2.375 inches (60.3 mm) to 2.875 inches (73 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7200697	ST1-30L-IHS	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6 mm Element Diameter, 30 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and Stainless Steel Frame).
Q7200698	ST1-35L-IHS	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6 mm Element Diameter, 35 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and Stainless Steel Frame). _x000D_
Q7200699	ST1-55L-IHS	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6 mm Element Diameter, 55 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and Stainless Steel Frame). _x000D_
Q7200700	ST1-45L-IHS-COD8	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and Stainless Steel Frame). The wedge features a curvature matching 8in Circumferential Outside Diamater for Inspection of Axial Welds. _x000D_
Q7200701	ST1-60L-IHS-COD8	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and Stainless Steel Frame). The wedge features a curvature matching 8in Circumferential Outside Diamater for Inspection of Axial Welds. _x000D_
Q7200702	ST1-70L-IHS-COD8	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and Stainless Steel Frame). The wedge features a curvature matching 8in Circumferential Outside Diamater for Inspection of Axial Welds. _x000D_
Q7200703	ST1-45L-IHS-COD6	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and Stainless Steel Frame). The wedge features a curvature matching 6in Circumferential Outside Diamater for Inspection of Axial Welds. _x000D_
Q7200704	ST1-60L-IHS-COD6	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and Stainless Steel Frame). The wedge features a curvature matching 6in Circumferential Outside Diamater for Inspection of Axial Welds. _x000D_
Q7200705	ST1-70L-IHS-COD6	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and Stainless Steel Frame). The wedge features a curvature matching 6in Circumferential Outside Diamater for Inspection of Axial Welds. _x000D_
Q7100010	ST1-34S-IHC	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6 mm Element Diameter, 34 degree Refracted Angle in Steel, Shear Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge generates a 23.7 degree Incident Angle. _x000D_
Q7200714	ST1-45L-IHC-COD8	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 8 inches (203.2 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7200716	ST1-70L-IHC-COD8	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 8 inches (203.2 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_
Q7200717	ST1-45L-IHC-COD6	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6 inches (152.4 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_
Q7200718	ST1-60L-IHC-COD6	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6 inches (152.4 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_
Q7200719	ST1-70L-IHC-COD6	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6 inches (152.4 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_
Q7000149	ST1-60L-IHC-COD7	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 7 inches (177.8 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_
Q7000150	ST1-70L-IHC-COD7	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 7 inches (177.8 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds. _x000D_
Q7000151	ST1-70L-IHC-AID6	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6 inches (152.4 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_
Q7000152	ST1-70L-IHC-AID4.5	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 4.5 inches (114.3 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_
Q7000153	ST1-60L-IHC-AID6	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6 inches (152.4 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_
Q7000154	ST1-60L-IHC-AID4.5	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 4.5 inches (114.3 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_
Q7000155	ST1-60L-IHC-AID3.5	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6 mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching a 3.5 inches (88.9mm) Axial Inside Diameter (AID) Pipe for Circumferential Welds. This wedge is not compatible with Olympus scanners. _x000D_
Q7000156	ST1-70L-IHC-AID3.5	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching a 3.5 inches (88.9mm) Axial Inside Diameter (AID) Pipe for Circumferential Welds. This wedge is not compatible with Olympus scanners. _x000D_
Q7000159	ST1-60L-IHC-AID21	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 21 inches (533.4 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds.
Q7000160	ST1-60L-IHC-AID19	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 19 inches (482.6 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_
Q7000161	ST1-60L-IHC-AID16	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 16 inches (406.4 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_
Q7000162	ST1-70L-IHC-AID21	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 21 inches (533.4 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_
Q7000163	ST1-70L-IHC-AID19	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 19 inches (482.6 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_
Q7000164	ST1-70L-IHC-AID16	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 16 inches (406.4 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_
Q7200855	ST1-75L-IHS	Standard Wedge for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 75 degree Refracted Angle in Steel, Longitudinal Wave, with IHS Option (Irrigation, Holes and SS frame).
Q7000170	ST1-70L-IHC-AID18	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 18 inches (457.2 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_
Q7000171	ST1-60L-IHC-AID18	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 18 inches (457.2 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_
Q7000172	ST1-45L-IHC-AID18	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 18 inches (457.2 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds. _x000D_
Q7100011	ST1-60L-IHC-COD10	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10 inches (254 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100012	ST1-70L-IHC-COD10	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10 inches (254 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100013	ST1-60L-IHC-COD20	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100014	ST1-60L-IHC-COD18	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 18 inches (457.2 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100015	ST1-60L-IHC-COD16	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 16 inches (406.4 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100016	ST1-60L-IHC-COD14	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100017	ST1-60L-IHC-COD12	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12 inches (304.8 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100018	ST1-70L-IHC-COD20	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100019	ST1-70L-IHC-COD18	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 18 inches (457.2 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100020	ST1-70L-IHC-COD14	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100023	ST1-45L-IHC-AOD6.625	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6.625 inches (168.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7100024	ST1-60L-AOD14	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7100025	ST1-70L-AOD14	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7100026	ST1-45L-AOD14	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7100027	ST2-35L-IHC	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 35° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).
Q7100028	ST1-45L-IHC-AID19.5	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 19.5 inches (495.3 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds.
Q7100029	ST1-60L-IHC-AID19.5	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 19.5 inches (495.3 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds.
Q7100030	ST1-70L-IHC-AID19.5	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 19.5 inches (495.3 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds.
Q7100031	ST1-60L-IHC-COD11.752	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 11,752 inches (298,5 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100032	ST1-65L-IHC-COD11.752	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 65° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 11,752 inches (298,5 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100033	ST1-65L-IHC-COD12	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 65° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12 inches (304,8 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7000211	ST1-50L-IHC-COD3.5	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 3.5 inches (88.9 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7000212	ST1-50L-IHC-COD4	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 50° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 4 inches (101.6 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7000214	ST1-0L-IH-AOD1.66-COBRA	Custom Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics, 0 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 1.315 inches (33.4 mm) to 1.66 inches (42.2 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
Q7000215	ST1-0L-IH-AOD1.9-COBRA	Custom Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics, 0 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching from 1.66 inches (42.2 mm) to 1.9 inches (48.3 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
Q7000216	ST1-0L-IH-AOD2.375-COBRA	Custom Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics, 0 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching from 1.9 inches (48.3 mm) to 2.375 inches (60.3 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
Q7000219	ST1-35L-IHC	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 35° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).
Q7201184	ST1-60L-CID35.25	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 35.25 inches (895.4 mm) Circumferential Inside Diameter (CID) Pipe for inspection of Longitudinal Welds.
Q7100044	ST1-70L-IHC-CID35.25	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 35.25 inches (895.4 mm) Circumferential Inside Diameter (CID) Pipe for inspection of Longitudinal Welds.
Q7100048	ST1-60L-IH-AOD6.625-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 6.625 in. (168.27 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
Q7100049	ST1-70L-IH-AOD6.625-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 6.625 in. (168.27 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
Q7100050	ST1-80L-IH-AOD6.625-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 6.625 in. (168.27 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
Q7000242	ST1-45S-IHC-AL-SA	Custom Wedge for Conventional TOFD UT probe, Panametrics type, 3 or 6mm element diameter, 45 degree shear wave in Aluminum, with IHC option (irrigation holes and carbides), Short Approach
Q7000284	ST1-80L-IHC-AOD4.5	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 80° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 4.5 inches (114.3 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds. _x000D_
Q7000306	ST1-45L-IHC-COD12	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12 inches (304.8 mm) Ci
Q7201378	ST1-45L-HDPE-WHC-AOD10	Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 45 degree longitudinal wave in High Density Polyethylene (HDPE), with WHC option (Water column, holes and carbides). The wedge features a curvature matching 10in (254mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds
Q7201379	ST1-60L-HDPE-WHC-AOD10	Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 60 degree longitudinal wave in High Density Polyethylene (HDPE), with WHC option (Water column, holes and carbides). The wedge features a curvature matching 10in (254mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds
Q7000307	ST1-70L-AOD10.75	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, without IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10.75 inches (273.1 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7201518	ST1-65L-IHS-COD10	Custom Wedge for Conventional TOFD uT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides in rexolite, no ring). The wedge features a curvature matching 10 inches (254 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100061	ST1-75L-HDPE-WHC	Custom wedge for Conventional TOFD uT probe, Panametrics type, 3 or 6mm element diameter, 75 degree longitudinal wave in High Density Polyethylene (HDPE), with WHC option (Water column, holes and carbides).
Q7100068	ST1C-ULT-45L-IHC	Custom Wedge made of Ultem for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides)
Q7000409	ST2-60L-IHC-AOD18	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 18 inches (457.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7000410	ST2-45L-IHC-AOD18	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 18 inches (457.2 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7000411	ST2-60L-IHC-AOD14	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7000412	ST2-45L-IHC-AOD14	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 14 inches (355.6 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7100069	ST1-45L-IHC-COD10	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10 inches (254 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100070	ST1-60L-IHC-COD4.5	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12.75 inches (323.9 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100071	ST1-60L-IHC-COD12.75	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12.75 inches (323.9 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100072	ST1-70L-IHC-COD4.5	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 4.5 inches (114.3 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100073	ST1-70L-IHC-COD12.75	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12.75 inches (323.9 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100074	ST1-60L-IHC-COD6.625	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6.625 inches (168.3 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7201792	ST1C-ULT-60L-IHC	Custom Wedge made of Ultem for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides)
Q7201793	ST1C-ULT-70L-IHC	Custom Wedge made of Ultem for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides)
Q7100083	ST1-80L-IHC-AOD5	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 80° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching from 4 inches (101.6 mm) to 5 inches (127 mm) Axial Outside Diameter (AOD) Pipe for inspection of Circumferential Welds.
Q7100084	ST1-45L-IHC-COD6.625	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6.625 inches (168.3 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100085	ST1-45L-IHC-COD8.625	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 8.625 inches (219.1 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100086	ST1-45L-IHC-COD10.75	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 8.625 inches (219.1 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100087	ST1C-VES-45L-IHC	Custom Wedge made of Vespel for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides)
Q7100088	ST1C-VES-60L-IHC	Custom Wedge made of Vespel for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides)
Q7100089	ST1C-VES-70L-IHC	Custom Wedge made of Vespel for Conventional TOFD uT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides)
Q7100090	ST1-70L-CUNI-IH-AOD4.5-Cobra	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in CuNi, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 4 in. (101.6 mm) to 4.5 in. (114.3 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
Q7100091	ST1-80L-CUNI-IH-AOD4.5-Cobra	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 80 degree Refracted Angle in CuNi, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 4 in. (101.6 mm) to 4.5 in. (114.3 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
Q7100092	ST1-72L-IHC	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 72° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides).
Q7100093	ST1-60L-IHC-COD10.75	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10.75 inches (273.1 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100094	ST1-70L-IHC-COD6.625	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6.625 inches (168.3 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100095	ST1-70L-IHC-COD10.75	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 10.75 inches (273.1 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100096	ST2-60L-IHC-AID6.96	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 6.96 inches (176.8 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds.
Q7100097	ST2-60L-IHC-AID3.3	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 9.5 or 12.5mm Element Diameter, 60° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 3.3 inches (83.8 mm) Axial Inside Diameter (AID) Pipe for inspection of Circumferential Welds.
Q7100098	ST1-70L-IHC-COD24	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 24 inches (609.6 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100099	ST1-70L-IHC-COD4	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 70° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 4 inches (101.6 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7100100	ST1-65L-IHC-COD12.75	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 65° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 12.75 inches (323.9 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.
Q7202099	ST1-70L-IH-AOD5.563-COBRA	Cobra Wedge for Conventional TOFD uT Probe, ST1 Panametrics Type with 3 mm Element Diameter, 70 degree Refracted Angle in Steel, Longitudinal Wave, with IH Option (Irrigation, Holes and without Carbides). The wedge features a curvature matching 5.563 in. (141.30 mm) outside diameter (OD) pipe for inspection of circumferential welds. IMPORTANT NOTE: The use of those wedges will increase minimum clearance required for the use of the cobra scanner.
Q7100101	ST1-45L-IHC-COD20	Custom Wedge for Conventional TOFD UT Probe, Panametrics Type, 3 or 6mm Element Diameter, 45° Refracted Angle in Steel, Longitudinal Wave, with IHC Option (Irrigation, Holes and Carbides). The wedge features a curvature matching 20 inches (508 mm) Circumferential Outside Diameter (COD) Pipe for inspection of Longitudinal Welds.

Các nêm cho đầu dò sử dụng phương pháp ToFD, bao gồm các nêm ST1, ST2 với tùy chọn X-Value ngắn với nhiều góc tùy biến lên tới 80 độ.

Cáp kết nối và bộ tiền khuếch đại khi kiểm tra TOFD

Một số ứng dụng siêu âm yêu cầu bổ sung bộ tiền khuếch đại (Pre-amplifier riêng) biệt cho thiết bị dò khuyết tật tiêu chuẩn, thiết bị đo độ dày hoặc các thiết bị khác để tăng cường tín hiệu và đạt được tín hiệu phản hồi tối ưu. Có thể thấy các yêu cầu này khi áp dụng kiểm tra TOFD cho các ứng dụng công nghiệp có liên quan đến các phần dày của vật liệu có sự suy giảm siêu âm hoặc tán xạ siêu âm, chẳng hạn như các mối hàn thép, thép Austenit, đồng thau, đồng, cao su, sợi thủy tinh hoặc vật liệu tổng hợp khác. Khi sử dụng bộ tiền khuếch đại, cần chú ý tới các thông tin an toàn để tránh làm hỏng thiết bị. Thông tin về bộ tiền khuếch đại tham khảo thêm tại đường link.

Mã thiết bị	部品番号	SL	説明
U8800517	C174-LM-UDOT-5M	2	Cáp Lemo-Microdot để kết nối trực tiếp đầu dò tới thiết bị siêu âm (Sử dụng khi không dùng kèm bộ tiền khuếch đại). CABLE LEMO-00 MALE 180° TO u-DOT 180°, 5M LONG COAXIAL RG174
U8800022	C174-LM-L90M-5M	5	Cáp lemo-lemo kết nối trực tiếp bộ tiền khuếch đại tới đầu dò. CABLE LEMO-00 MALE 90° TO LEMO-00 MALE 180°,5M LONG COAXIAL RG174.
U8800690	C174-LM-UDOT-0.45M	3	Cáp lemo-microdot ngắn, kết nối đầu dò tới bộ tiền khuếch đại. CABLE LEMO-00 MALE 180° to u-DOT 180°, 0.45 M
Bộ tiền khuếch đại cho TOFD (Pre-Apmlifier)
U8779091	5682-KIT02	1	5682 preamplifier, one 5m UT probe cable (LEMO 00 to LEMO 00), one 0.6m UT probe cable (LEMO 00 to Microdot), one 5m UT probe cable (LEMO 00 to Microdot), one 5 m power supply cable linking to OmniScan, belt case, bracket to attach the 5682 to HSMT-type scanners

カテゴリー

分野