チューブ試験用RFTプローブ

TRS – Single exciter

Features

• Includes a 32 dB preamplifier
• Improved wear resistance and thicker casing
• Improved differential response
• Detects irregularities such as pitting, corrosion, and erosion in ferromagnetic tubing

Probe outside diameter

Probe diameters ranging from 9 mm (0.35 in.) to 26 mm (1.02 in.) are built with a protective stainless steel casing and are available in increments of 1 mm. Larger probe diameters from 22.0 mm (0.866 in.) to 50.0 mm (1.968 in.) are available in increments of 2 mm.

Probes with a diameter greater than 28.0 mm (1.100 in.) have a lightweight design with the probe body made of plastic. This design also includes stainless steel wear rings on each end and a sturdy probe cable to endure multiple probe pulls. Coils are potted (in black on picture) for maximum protection.

TRX – Dual exciter

Features

• Single or dual exciter operation selectable from the software interface
• Includes a 32 dB preamplifier
• Improved wear resistance and thicker casing
• Better detection of irregularities in the vicinity of the support plate
• Better sensitivity to pitting when operated in dual exciter mode
• Improved differential response and signal-to-noise ratio

Probe outside diameter

Probe diameters ranging from 9 mm (0.35 in.) to 26 mm (1.02 in.) are built with a protective stainless steel casing and are available in increments of 1 mm. Larger probe diameters from 22.0 mm (0.866 in.) to 50.0 mm (1.968 in.) are available in increments of 2 mm.

Probes with a diameter greater than 28.0 mm (1.100 in.) have a lightweight design with the probe body made of plastic. This design also includes stainless steel wear rings on each end and a sturdy probe cable to endure multiple probe pulls. Coils are potted (in black on picture) for maximum protection.

TRT – Dual pickup

Features

• Dual pickup design
• Includes a 32 dB preamplifier
• Improved wear resistance and thicker casing
• Better detection of irregularities in the vicinity of the support plate
• Improved differential response and signal-to-noise ratio

Probe outside diameter

Probe diameters ranging from 9 mm (0.35 in.) to 26 mm (1.02 in.) are built with a protective stainless steel casing and are available in increments of 1 mm. Larger probe diameters from 22.0 mm (0.866 in.) to 50.0 mm (1.968 in.) are available in increments of 2 mm.

Probes with a diameter greater than 28.0 mm (1.100 in.) have a lightweight design with the probe body made of plastic. This design also includes stainless steel wear rings on each end, and a sturdy probe cable to endure multiple probe pulls. Coils are potted (in black on picture) for maximum protection.

TRC – Boiler probe

Features

• Single exciter-type with differential and absolute pickups.
• Includes a built-in preamplifier for maximum reduction of false indications.
• Replaceable centering brushes (part number: TR-ACC-01 [U8770249]).
• Optional expandable spring-centering arms

Probe outside diameter

Standard probe diameters are available from 28.0 mm (1.10 in.) to 65.0 mm (2.56 in.). The part number shows the diameter in tenths of mm (1/10 mm) so 45.0 mm = “450.” Standard available diameters are listed in the chart below:

TRG – Small flexible probe

Features

• Flexible bullet design
• To be used with TR-ADP-010 adapter

Probe outside diameter

Standard probe diameters are available from 9.0 mm to 25.0 mm. The part number shows the diameter in tenths of mm (1/10 mm) so 9.0 mm = “090”.